{"nhtsa_id":10170231,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2020-01-17","date":"2015-08-03","document_id":"2041158/2","mfr_campaign":null,"replaces":null,"component":"STRUCTURE","mfr_system":null,"summary":"Bonnet vent spacer clarification and bonnet vent fixing/washer orientation (SC15/13) Technical background: Two checks are required relating to the bonnet vents they are as follows: 1. On a small amount of vehicles the spacer washers (as shown in Figure 1) which are fitted between the carbon vents and the bonnet may be missing, the scenario will be as follows a. No washers fitted at all (NOT OK) orb) a full set of washers fitted (OK) 2. The fastener and washer sequence securing the bonnet vent may be incorrect NOTE: The fixings/washers will require removing and replacing during the confirmation process relating to the presence of the vent washers Remedy: The 8 fasteners securing the bonnet vents for each applicable car should be removed to allow the inspection and clarification that the bonnet vent washers are fitted New fasteners and washers should be fitted in the sequence shown within the work section of this campaign","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2015/MC-10170231-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2015/MC-10170231-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10170231","components":[{"id":"structure-body","name":"Body and frame","parent":null}],"codes":[],"topics":[],"vehicles":[{"make":"BENTLEY","model":"CONTINENTAL GT","year_from":2015,"year_to":2015,"match":"base","vehicle_ids":["2015_bentley_continental"]}],"as_of":"2026-10-19","note":"A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.","attribution":[]}