WenmarOpen by Wenmar Pro

Tire size comparison calculator

Compares two metric tire sizes: the sidewall height, overall diameter, circumference and revolutions per kilometre of each, the difference in diameter, and the true speed when the speedometer reads 100 km/h.

The form is filled in with an example. Change the sizes and press the button.

Write each size as it is on the sidewall, such as 275/65R18, P215/65R15 or LT285/70R17.

Result

This is the result of the example in the form.

The two sizes
Figure275/65R18LT285/70R17
Sidewall height178.8 mm (7.04 in)199.5 mm (7.85 in)
Overall diameter814.7 mm (32.07 in)830.8 mm (32.71 in)
Circumference2559.5 mm2610.0 mm
Revolutions per kilometre390.7383.1
The second size against the first
FigureAmount
Difference in diameter16.1 mm (0.63 in)
Difference as a percent of the first diameter1.976%
Change in ride height8.1 mm (0.32 in)
True speed when the speedometer reads 100 km/h102.0 km/h

With the second size fitted and the speedometer not corrected, the vehicle goes faster than the speedometer reads, and the odometer counts less distance than was driven.

A tire's real diameter differs a little from its nominal size, by maker and by wear. This page does not say whether a size fits a vehicle, clears its body and suspension, or carries its load.

How this is worked out

In 275/65R18, 275 is the width in millimetres, 65 is the sidewall height as a percent of the width, and 18 is the rim diameter in inches. The letters P and LT say what the tire is built for and change no figure here.

Sidewall height = width × aspect ratio ÷ 100.

Overall diameter = rim diameter × 25.4 + 2 × sidewall height, in millimetres.

Circumference = π × overall diameter. Revolutions per kilometre = 1,000,000 ÷ circumference in millimetres.

Difference as a percent = (second diameter − first diameter) ÷ first diameter. Change in ride height = half the difference in diameter. True speed at a reading of 100 km/h = 100 × second diameter ÷ first diameter.

Each figure is worked from the exact diameter and rounded once, where it is shown.

This is arithmetic, not accounting or tax advice.

Wenmar Pro is shop management software from the people who make this site.