WenmarOpen by Wenmar Pro

R-134a and R-1234yf pressure-temperature chart

Shows the pressure of the refrigerants R-134a and R-1234yf at each temperature, in Celsius and Fahrenheit and in kPa and psi, as read from a published source.

Each pressure is that of the refrigerant alone, at rest, at the temperature beside it. A gauge on a running system reads something else, and air or another refrigerant in the system changes the reading. This chart is not a charging procedure: follow the vehicle maker's.

R-134a

Not yet checked. No figure is shown for R-134a until each one has been read from a published source.

The pressure at each temperature has not been read from a published source yet.

R-1234yf

Not yet checked. No figure is shown for R-1234yf until each one has been read from a published source.

The pressure at each temperature has not been read from a published source yet.

How this is worked out

°F = °C × 9 ÷ 5 + 32, and °C = (°F − 32) × 5 ÷ 9.

1 psi = 6.894757 kPa.

A gauge pressure is what a gauge reads above the air around it; an absolute pressure is measured from a vacuum. Each column's heading says which it is. No figure is worked out between two rows: the rows are the ones the source gives.

Wenmar Pro is shop management software from the people who make this site.