Transport Canada recall 2024431
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2024431 |
| Manufacturer's number | R0266 |
| Reported | 2024-07-25 |
| Component | Powertrain |
| Notification type | Safety TC |
| Units potentially affected | 5201 |
What is wrong
Issue:
On certain vehicles, the clutch ignition lock switch could fail. As a result, you may be able to start the vehicle when the clutch pedal is not depressed. This could cause the vehicle to move suddenly.
Note: This recall only affects vehicles equipped with a manual transmission.
Safety Risk:
A parked vehicle that moves suddenly could create the risk of an injury or a crash.
Corrective Actions:
Hyundai will notify owners by mail and advise you to take your vehicle to a dealership to replace the clutch ignition lock switch.
| 2010 HYUNDAI GENESIS COUPE | |
|---|---|
| 2011 HYUNDAI GENESIS COUPE | |
| 2012 HYUNDAI GENESIS COUPE | |
| 2013 HYUNDAI GENESIS COUPE |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 24-AT-002H | 2024-04-16. Service bulletin. This TSB provides a procedure to diagnose and replace, if necessary, an automatic transmission with Incorrect Ratio DTC (transmission clutch slip in gear above limit) listed on Page 2. |
|---|---|
| 23-01-014H-5 | 2023-09-06. Service bulletin. Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers. |
| 21-AT-018H | 2021-12-09. Service bulletin. This bulletin describes the procedure to replace the 35R and 4&OD solenoids for a shift flare and/or harsh shift during the 2~3, 3~4 or 4~5 upshift. |
| 20-AT-016H | 2020-05-07. Service bulletin. The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions: |
| 19-AT-021H-1 | 2020-01-21. Service bulletin. If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. ? PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). ? FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so, replace the transmission. |
| 19-EM-001H | 2019-11-06. Service bulletin. This bulletin provides information regarding the changes in the timing chain and the crankshaft sprockets on certain Azera (HG), Santa Fe/Santa Fe XL (NC), Genesis (BH/DH), Genesis Coupe (BK), and G90 (HI) vehicles equipped with Lambda 3.3L / 3.8L GDI engines. |
| 19-AT-014H | 2019-07-29. Service bulletin. This bulletin provides a procedure to diagnose an 8-speed automatic transaxle with a harsh and/or delayed shift using GDS. |
| 19-AT-011H | 2019-07-01. Service bulletin. The procedure describes the procedure to check the ATF level for 8-speed Rear-Wheel-Drive vehicles. |
| 19-AT-008H | 2019-05-20. Service bulletin. When servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure and replace the related solenoid and E-module. |
| 19-FL-003H | 2019-05-20. Service bulletin. This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.