Transport Canada recall 2024113
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2024113 |
| Manufacturer's number | 12B |
| Reported | 2024-02-22 |
| Component | Lights And Instruments |
| Notification type | Compliance Mfr |
| Units potentially affected | 836 |
What is wrong
Issue:
On certain vehicles, the driver may not be able to turn on the high beam headlamps if the light switch is in the "AUTO" position.
Note: This recall affects Grand Cherokee and Grand Cherokee L models.
Safety Risk:
High beam headlamps that don't turn on may cause reduced visibility and could increase the risk of a crash.
Corrective Actions:
FCA Canada will notify owners by mail and advise you to take your vehicle to a dealership to update the vehicle software.
| 2023 JEEP GRAND CHEROKEE | |
|---|---|
| 2024 JEEP GRAND CHEROKEE |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| S2308000120 REV.B | 2024-06-24. Service bulletin. Rain Sensing Auto Wipers and Auto on Head Lamps Inoperative |
|---|---|
| 2300424 | 2024-03-18. Service bulletin. Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses. |
| 2100324 | 2024-03-18. Service bulletin. Flash: Transmission Control Module (TCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set in the Hybrid Control Processor (HCP) module: ? P16F0-00 - SPI Comm Hardware Fault. Customers may also comment on one or more of the following: ? Shifts rough occasionally when coming down to a stop. ? Shifts rough occasionally when accelerating. ? Shifts rough when transitioning from EV to Hybrid operation on low SoC. ? Shifts rough when engines starts. ? On part throttle accelerations with little to no battery available the transition from battery power to engine on is harsh and abrupt. ? The engine oil life on dashboard drops down too fast when the engine oil dilution reaches high level without the ability to recover. This bulletin involves reprogramming the TCM, Powertrain Control Module (PCM) and the Auxiliary Hybrid Control Processor (AHCP) also known as Power Inverter Module (PIM), with the latest available software. |
| 1800124 | 2024-03-18. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set in the Hybrid Control Processor (HCP) module: ? P16F0-00 - SPI Comm Hardware Fault. Customers may also comment on one or more of the following: ? Shifts rough occasionally when coming down to a stop. ? Shifts rough occasionally when accelerating. ? Shifts rough when transitioning from EV to Hybrid operation on low SoC. ? Shifts rough when engines starts. ? On part throttle accelerations with little to no battery available the transition from battery power to engine on is harsh and abrupt. ? The engine oil life on dashboard drops down too fast when the engine oil dilution reaches high level without the ability to recover. This bulletin involves reprogramming the PCM, Transmission Control Module (TCM) and the Auxiliary Hybrid Control Processor (AHCP) also known as Power Inverter Module (PIM), with the latest available software. |
| 0801324 | 2024-03-18. Service bulletin. Flash: Hybrid Control Processor (HCP) and Auxiliary Hybrid Control Processor (AHCP) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set in the Hybrid Control Processor (HCP) module: ? P16F0-00 - SPI Comm Hardware Fault. Customers may also comment on one or more of the following: ? Shifts rough occasionally when coming down to a stop. ? Shifts rough occasionally when accelerating. ? Shifts rough when transitioning from EV to Hybrid operation on low SoC. ? Shifts rough when engines starts. ? On part throttle accelerations with little to no battery available the transition from battery power to engine on is harsh and abrupt. ? The engine oil life on dashboard drops down too fast when the engine oil dilution reaches high level without the ability to recover. This bulletin involves reprogramming the Powertrain Control Module (PCM), Transmission Control Module (TCM) and the AHCP also known as Power Inverter Module (PIM), with the latest available software. |
| 0801124 | 2024-03-18. Service bulletin. Flash: Battery Pack Control Module (BPCM) Diagnostic and System Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? P0AA4-00 - Hybrid Battery Negative Contactor Circuit Stuck Closed. ? P0AA1-00 - Hybrid/EV Battery Positive Contactor ?A? Stuck Closed. Customers may also experience the following: ? The vehicle will not start. This bulletin involves updating the BPCM with the latest available software. |
| 0801024 | 2024-03-18. Service bulletin. Flash: Battery Pack Control Module (BPCM) Diagnostic and System Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? P0AA4-00 - Hybrid Battery Negative Contactor Circuit Stuck Closed. ? P0AA1-00 - Hybrid/EV Battery Positive Contactor ?A? Stuck Closed. Customers may also experience the following: ? The vehicle will not start. This bulletin involves updating the BPCM with the latest available software. |
| S2408000006 | 2024-03-18. Service bulletin. High Beams Do Not Turn on While the Headlamp Switch Is Set to The Auto Lights on Position, High Beam Headlamps Do Operate with Switch Set to Manual Lights On Low Beam Position |
| 2302923 | 2024-01-02. Service bulletin. Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses (Fig. 1) . This bulletin is to communicate the procedure for head lamp condensation clearing. |
| 0803523 | 2024-01-02. Service bulletin. Flash: Memory Seat Module (MSM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC). ? B1D9B-54 - Seat Horizontal Front Stop Not Learned-Missing Calibration. Customers may experience the following: ? Memory seat does not save on profiles 1 or 2. ? Easy entry/exit functionality is inoperative. This bulletin involves reprogramming the MSM with the latest available software. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.