WenmarOpen by Wenmar Pro

Transport Canada recall 2023312

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

Campaign
Published byTransport Canada (Canada)
Campaign number2023312
Manufacturer's number68A
Reported2023-05-30
ComponentBrakes
Notification typeSafety Mfr
Units potentially affected104

What is wrong

Issue:

In certain situations, the braking system could apply too much force to the brake rotors. If this happens, the brake rotors could crack and suddenly cause reduced braking.

Note: This recall only affects vehicles equipped with carbon ceramic matrix brakes.

Safety Risk:

Reduced braking can cause an extended stopping distance and increase the risk of a crash.

Corrective Actions:

FCA Canada will notify owners by mail and advise you to take your vehicle to a dealership to update the brake system module (BSM) software.

Vehicles this campaign lists
2017 ALFA ROMEO GIULIA
2018 ALFA ROMEO GIULIA
2019 ALFA ROMEO GIULIA
2020 ALFA ROMEO GIULIA
2018 ALFA ROMEO STELVIO
2019 ALFA ROMEO STELVIO
2020 ALFA ROMEO STELVIO

A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.

Bulletins for the same vehicles and component

Bulletins for the same vehicles and component
S1705000002 REV.A2025-01-28. Service bulletin. Front Brake Pulsation and/or Clunk Noise
18045232023-05-30. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs have been set: ? **P0331-00 - Knock Sensor 2 Circuit Range/Performance.** ? P0106-00 - Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance. ? P013A-00 - O2 Sensor Slow Response Rich To Lean Bank 1 Sensor 2. ? P015A-00 - O2 Sensor Delayed Response Rich To Lean Bank 1 Sensor 1. ? P026E-00 - Charge Air Cooler Coolant Pump Performance. ? U1008-00 - LIN 1 BUS. ? P1CEA-00 - Boost Side EVAP Purge System Performance. Customers may experience one or more of the following: ? Not passing vehicle certification during state inspections if performed after a system reset. ? Drive-ability issues. In addition, the following improvement is also available: ? Turbo coolant pump after run duration and on-off strategy update, to improve turbo O-ring durability. This bulletin involves reprogramming the PCM with the latest available software.
90032932022-08-08. Service bulletin. A/C Pressure Transducer A/C inoperative and diagnosis leads to pressure transducer. Call Steve Rice at cell (248) 867-0061 before replacing the pressure transducer. If no response in 15 minutes, please proceed with repair.
18-026-202020-05-26. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Engine Control Module (ECM), also known as a PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs have been set:P0106-00 - Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance. P013A-00 - O2 Sensor Slow Response Rich To Lean Bank 1 Sensor 2. P015A-00 - O2 Sensor Delayed Response Rich To Lean Bank 1 Sensor 1. P1CEA-00 - Boost Side EVAP Purge System Performance. P0096-00 - Intake Air Temperature Sensor 2 Circuit Range-Performance. P04DB-00 - Crankcase Ventilation System Disconnected. P024A-00 - Charge Air Cooler Bypass Control "A" Range/Performance. P2097-00 - Post Catalyst Fuel Trim System Rich. P2B2F-00 - Fan 1 Performance/Stuck Off. P24D6-00 - EVAP System Pressure Sensor/Switch "B" Circuit Range/Performance. P01BA-00 - Engine Oil Temperature Sensor "B" Range/Performance. P026E-00 - Charge Air Cooler Coolant Pump Performance. P164E-00 - A/C Clutch Relay Control Range/Performance. P0191-00 - Fuel Rail Pressure Sensor "A" Circuit Range/Performance. P2299-00 - Brake Pedal Position/Accelerator Pedal Position Incompatible. U1008-00 - LIN 1 BUS. Customers may experience one or more of the following:Not passing vehicle certification during state inspections if performed after a system reset. Driveability issues. Engine misfire when cold. In addition, the following improvements are also available:Turbo coolant pump after run duration and on-off strategy update, to improve turbo O-ring durability. Message ?S&S Not Available? will be changed to ?Hood Open?. Improved idle stability during tip in tip out. Improved idle stability during an Engine Start Stop (ESS) event.
18-024-202020-05-26. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Engine Control Module (ECM), also knownas a PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs have been set:P0106-00 - Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance. P013A-00 - O2 Sensor Slow Response Rich To Lean Bank 1 Sensor 2. P015A-00 - O2 Sensor Delayed Response Rich To Lean Bank 1 Sensor 1. P026E-00 - Charge Air Cooler Coolant Pump Performance. U1008-00 - LIN 1 BUS. P1CEA-00 - Boost Side EVAP Purge System Performance. Customers may experience one or more of the following:Not passing vehicle certification during state inspections if performedafter a system reset. Drive-ability issues. In addition, the following improvement is also available:Turbo coolant pump after run duration and on-off strategy update, to improveturbo O-ring durability.
18-026-202020-04-27. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Engine Control Module (ECM), also known as a PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs have been set:P0106-00 - Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance. P013A-00 - O2 Sensor Slow Response Rich To Lean Bank 1 Sensor 2. P015A-00 - O2 Sensor Delayed Response Rich To Lean Bank 1 Sensor 1. P1CEA-00 - Boost Side EVAP Purge System Performance. P0096-00 - Intake Air Temperature Sensor 2 Circuit Range-Performance. P04DB-00 - Crankcase Ventilation System Disconnected. P024A-00 - Charge Air Cooler Bypass Control "A" Range/Performance. P2097-00 - Post Catalyst Fuel Trim System Rich. P2B2F-00 - Fan 1 Performance/Stuck Off. P24D6-00 - EVAP System Pressure Sensor/Switch "B" Circuit Range/Performance. P01BA-00 - Engine Oil Temperature Sensor "B" Range/Performance. P026E-00 - Charge Air Cooler Coolant Pump Performance. P164E-00 - A/C Clutch Relay Control Range/Performance. P0191-00 - Fuel Rail Pressure Sensor "A" Circuit Range/Performance. P2299-00 - Brake Pedal Position/Accelerator Pedal Position Incompatible. U1008-00 - LIN 1 BUS. Customers may experience one or more of the following:Not passing vehicle certification during state inspections if performed after a system reset. Driveability issues. Engine misfire when cold. In addition, the following improvements are also available:Turbo coolant pump after run duration and on-off strategy update, to improve turbo O-ring durability. Message ?S&S Not Available? will be changed to ?Hood Open?. Improved idle stability during tip in tip out. Improved idle stability during an Engine Start Stop (ESS) event.
08-044-192019-07-15. Service bulletin. Flash: Anti-Lock Brake System (ABS) Module Diagnostic and System Updates This bulletin involves reprogramming the ABS module with the latest available software. The following enhancement is included with this update:Improved brake pedal feel.

A bulletin is the manufacturer's note to its dealers. It is not part of this recall.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.