Transport Canada recall 2022644
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2022644 |
| Manufacturer's number | ZA3 |
| Reported | 2022-11-10 |
| Component | Powertrain |
| Notification type | Safety Mfr |
| Units potentially affected | 17606 |
What is wrong
Issue:
On certain trucks, a buildup of heat and pressure inside the transmission could cause fluid to leak from the transmission dipstick tube.
Note: This recall only affects trucks equipped with a Cummins 6.7 L diesel engine and a 68RFE automatic transmission.
Safety Risk:
A transmission fluid leak could create the risk of a fire.
Corrective Actions:
FCA Canada will notify owners by mail and instruct you to take your vehicle to a dealership to replace the transmission dipstick and vent assembly.
| 2020 RAM 2500 | |
|---|---|
| 2021 RAM 2500 | |
| 2022 RAM 2500 | |
| 2023 RAM 2500 | |
| 2020 RAM 3500 | |
| 2021 RAM 3500 | |
| 2022 RAM 3500 |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 9100841 Rev 1 | 2026-07-02. Service bulletin. If customer concern diagnosis leads to suspect u-joint issue with the prop shaft, u-joint service kit should be utilized to fix concern. Prop shaft replacement would not be required. |
|---|---|
| 9100841 | 2026-07-02. Service bulletin. HD Front and Rear Prop Shafts Increase U-Joint Usage If customer concern diagnosis leads to suspect u-joint issue or failure with the prop shaft, u-joint service kit should be utilized to fix concern. Prop shaft replacement would not be required. |
| 21-039-26 | 2026-05-20. Service bulletin. Replace K1 Clutch / Input Shaft Assembly Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P0731-00 - Gear 1 Shift Incorrect Ratio (This DTC will set during a key cycle and shifting into Drive). Customers must also comment on the following: ● The transmission will not shift into or out of 1st - 4th gears. 5th and reverse gears are still available This bulletin involves replacing the K1 clutch and possibly the K1 input shaft drum sub-assembly. These repairs are to be performed only if the vehicle is inoperable due to K1 clutch failure |
| 21-039-26 | 2026-05-13. Service bulletin. Replace K1 Clutch / Input Shaft Assembly Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P0731-00 - Gear 1 Shift Incorrect Ratio (This DTC will set during a key cycle and shifting into Drive). Customers must also comment on the following: ● The transmission will not shift into or out of 1st - 4th gears. 5th and reverse gears are still available This bulletin involves replacing the K1 clutch and possibly the K1 input shaft drum sub-assembly. These repairs are to be performed only if the vehicle is inoperable due to K1 clutch failure |
| S2621000003 REV.A | 2026-03-18. Service bulletin. The vehicle will exhibit a service transmission/check engine warning indicator for the following transmission models: 845RE, 8HP45, 850RE, 8HP50, 8HP70, 8HP75, 8HP75-PHEV, 8HP75-LCV, 8HP90, 8HP95. Transmissions may exhibit the following diagnostic codes: P07E4, P1DB2, P0716, P1B14, P0733, P1D90, P1DB7, P1B13. |
| S2516000001 | 2025-10-29. Service bulletin. Driveline Vibration. Prop Shaft Diagnostic Information. |
| 21-041-25 | 2025-10-08. Service bulletin. Aisin K1 Clutch/Input Shaft Assembly Replacement XW1 Warranty Extension Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P0731-00 - Gear 1 Shift Incorrect Ratio. NOTE: This DTC will set during a key cycle and shifting into Drive. Customers may also comment on the following: ● The transmission will not shift into or out of 1st - 4th gears. 5th and reverse gears are still available. This bulletin involves replacing the K1 clutch and possibly the K1 input shaft drum sub-assembly. |
| 107775 | 2025-10-08. Warranty extension. ID-25-15 (XW1) Aisin K1 Clutch/ Input Shaft Assembly - Select 2022 RAM Trucks (D2/DD/DP) |
| 107774 | 2025-10-08. Warranty extension. D-25-18 (XW1) Aisin K1 Clutch/ Input Shaft Assembly - Select 2022 RAM Trucks (D2/DD/DP) |
| 9100642 | 2025-08-13. Service bulletin. When customer complaint is related to inoperative 4 Wheel Drive shifter, loss of 4WD function and/or 4WD related MIL please reference SOL Case #S2508000062 prior to replacement of Transfer Case shift motor. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.