Transport Canada recall 2021202
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2021202 |
| Manufacturer's number | R20C5 |
| Reported | 2021-04-05 |
| Component | Engine |
| Notification type | Safety Mfr |
| Units potentially affected | 913 |
What is wrong
Issue:
On certain vehicles, a programming error in the engine control module (ECM) could cause loss of engine power and/or cause the engine to stall.
Note: The malfunction indicator lamp (MIL) may turn on before an engine stall happens.
Safety Risk:
A loss of engine power could increase the risk of a crash.
Corrective Actions:
Infiniti will notify owners by mail and instruct you to take your vehicle to a dealer to reprogram the ECM software.
| 2021 INFINITI Q50 | |
|---|---|
| 2021 INFINITI Q60 |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| ITB22-038D | 2025-02-10. Service bulletin. TURBOCHARGER REPLACEMENT PROCEDURE APPLIED ENGINES: VR30DDTT IF YOU CONFIRM One or both turbochargers require replacement. ACTION 1. Replace the affected turbocharger(s). • Refer to the SERVICE PROCEDURE in this bulletin for the updated procedure. IMPORTANT: You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. 2. Refer to step 212 in the SERVICE PROCEDURE to confirm if the ECM needs to be reprogrammed. • 2016-2024 Q50 and 2017-2021 Q60 will require ECM reprogramming at the end of this SERVICE PROCEDURE. 3. If the ECM part number is in Table A (page 61 and 63), reprogram the ECM. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. |
|---|---|
| ITB22-038C | 2023-12-08. Service bulletin. TURBOCHARGER REPLACEMENT PROCEDURE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB22-038B | 2023-09-08. Service bulletin. TURBOCHARGER REPLACEMENT PROCEDURE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB23-001 | 2023-02-04. Service bulletin. MIL ON WITH DTC P0101 AND/OR P010B STORED IN THE ECM SERVICE INFORMATION If the MIL is ON and DTC P0101 (MAF SEN/CIRCUIT-B1) and/or DTC P010B (MAF SEN/CIRCUIT-B2) is stored in the ECM on an APPLIED VEHICLE, follow the information in this bulletin along with the ESM to complete the required repairs. |
| ITB22-038A | 2023-01-10. Service bulletin. TURBOCHARGER REPLACEMENT PROCEDURE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB22-038 | 2022-12-06. Service bulletin. TURBOCHARGER REPLACEMENT PROCEDURE SERVICE INFORMATION If either one or both turbochargers require replacement, refer to the SERVICE PROCEDURE in this bulletin for the updated procedure. IMPORTANT: You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. • 2016-2017 Q50 and 2017 Q60 will require an ECM reprogramming at the end of this SERVICE PROCEDURE for Turbocharger Exhaust Gas Temperature Sensor deletion. Refer to ITB17-050. |
| ITB17-042E | 2022-03-12. Service bulletin. DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB13-044J | 2022-03-12. Service bulletin. EVAP LEAK DTC P0442, P0455, P0456 INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB14-011F | 2022-02-10. Service bulletin. REMOTE ENGINE START NOT WORKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB21-009 | 2021-06-09. Service bulletin. 2021 Q50/Q60; DTC P0607 STORED IN THE ECM IF YOU CONFIRM If CONSULT-III plus is available: DTC P0607 (ECM) is stored in the ECM. This DTC may be in Current or Past status. If CONSULT-III plus is not available: The vehicle displays an engine stall / no start condition with adequate fuel level, adequate battery voltage, and no fuel pump related DTCs present, Or DTC P0300 (Multiple Cylinder Misfire) is stored in the ECM and the vehicle displays misfire events on cylinder 3 and cylinder 6 only. ACTION 1. Replace the ECM. 2. Reprogram the ECM. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.