Transport Canada recall 2019496
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2019496 |
| Manufacturer's number | 2618F |
| Reported | 2019-09-30 |
| Component | Airbag |
| Notification type | Safety Mfr |
| Units potentially affected | 4460 |
What is wrong
Issue:
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Safety Risk:
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Corrective Action:
Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator or airbag module replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected. Additional note: This recall supersedes recalls 2014-245 (Mazda Recall 7714F), 2018-038 (Mazda Recall 2018A) and 2018-584 (Mazda Recall 2018A). Vehicles repaired under the previous recalls do not require repair under this recall.
| 2004 MAZDA RX-8 | |
|---|---|
| 2005 MAZDA RX-8 | |
| 2006 MAZDA RX-8 | |
| 2007 MAZDA RX-8 | |
| 2008 MAZDA RX-8 | |
| 2009 MAZDA RX-8 | |
| 2010 MAZDA RX-8 | |
| 2011 MAZDA RX-8 |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SSPB3 | 2021-06-01. Service bulletin. Subject: ** UPDATE** - Takata Inflator Special Service Program (Extended Warranty) Special Service Program SSPB3: In December 2017 Special Service Program SSPB3 - Takata Inflator Extended Warranty was announced. The extended warranty was a result of the Takata airbag inflator class action settlement. Mazda will provide supplemental warranty coverage for all repairs and replacements (including parts and labor) to correct any defects in the materials or workmanship of Takata airbag inflators and the replacement inflators installed pursuant to the Takata airbag recalls. The program covers defects in the Inflator only and does not cover other items in the airbag system. Additionally, the program also does not cover airbags that have properly deployed as a result of a collision. |
|---|---|
| 08-001-19-3544 | 2019-02-19. Service bulletin. This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service. |
| 08-001-18-3457 | 2018-05-14. Service bulletin. This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service. |
| MT-003-18 | 2018-04-23. Service bulletin. The Workshop Manual has two-different airbag procedures, one for Standard Deployment and one for Two-Step Deployment. Standard Deployment is for Mexico spec vehicles and Two-Step Deployment is for US and Canadian spec vehicles. |
| 08-003-17-3345 | 2017-10-21. Service bulletin. Mazda Motor Corporation is going to evaluate the following inflators to ensure the safety of the inflator with a desiccant. In order to do this, MNAO is collecting inflators for evaluation in certain zones. For 2003-2008 Mazda6 (including Mazdaspeed6) and 2004-2011 RX-8: Collect 30 Driver-side and 30 Pas-senger-side inflators (60 total) from vehicles that have completed Recall 8215F for Driver-side and Recall 9416E for Passenger-side airbags in the following zones. For 2010-2013 Mazda3: Collect 200 Passenger-side inflators from vehicles in the following zones. |
| SA-068-17 | 2017-10-12. Service bulletin. STOPPER PLATES FOR AIR BAG MODULE CONNECTORS HAVE BEEN ESTABLISHED AS NEW SERVICE PARTS. When removing the connector (1) to the air bag module (2), make sure to first lift the stopper plate (3) carefully using a flathead screwdriver (but do not remove it), and then pull out the connector. |
| 08-001-13-2859 | 2017-08-10. Service bulletin. This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service. |
| SA327 | 2016-12-02. Service bulletin. TAKATA RECALLS GENERAL INFORMATION PURPOSE: THIS PAGE WAS CREATED TO ASSIST WITH HANDLING TAKATA AIR BAG RECALLS. PROCESSES: PLEASE USE THESE PROCESS FLOWCHARTS TO PROPERLY HANDLE VEHICLES SUBJECT TO THE TAKATA AIR BAG RECALL. RECALL 8215F & 9416E PRELIMINARY PARTS PROCESS RECALL 9516E & 9616E PRELIMINARY PARTS PROCESS GENERAL INFORMATION: THE LINKS BELOW CONTAIN THE LATEST TAKATA RECALLS INFORMATION. THE DOCUMENTS WILL BE UPDATED AS RECALL CONDITIONS CHANGE. |
| SR-7714-F | 2014-11-04. Service bulletin. MAZDA: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. AN INCREASED COMBUSTION, DURING AIR BAG DEPLOYMENT, IS DUE TO INFLATOR PROPELLANT MATERIAL, THAT WAS IMPROPERLY PROCESSED AND AIR BAG MODULE CAN RUPTURE AND INJURE OCCUPANT(S). MODEL 2003-2004 MAZDA6, 2004 RX-8. *PE |
| SB-08-001-13 | 2014-02-26. Service bulletin. MAZDA: INFORMATION PROVIDED REGARDING THE INDICATOR LIGHT ILLUMINATION OF THE PASSENGER AIRBAG DEACTIVATION (PAD). *PE |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.