Transport Canada recall 2019137
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2019137 |
| Manufacturer's number | V32 |
| Reported | 2019-03-15 |
| Component | Lights And Instruments |
| Notification type | Compliance Mfr |
| Units potentially affected | 32 |
What is wrong
Issue:
On certain vehicles, the instrument cluster may not work.
Safety Risk:
An instrument cluster that does not work may prevent an operator from receiving information regarding the status of vehicle systems. This could increase the risk of a crash.
Corrective Actions:
The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the instrument cluster software updated.
| 2019 CHRYSLER 300 | |
|---|---|
| 2019 DODGE CHALLENGER | |
| 2019 DODGE CHARGER |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| S2008000101 | 2023-01-09. Service bulletin. Blind Spot Indicator Light Remains On In High Ambient Temperatures |
|---|---|
| 1806522 | 2023-01-09. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 - EVAP Pressure Switch Stuck Closed. P0455 - EVAP System Large Leak. P0440 - General EVAP System Failure. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT)to determine if a leak is present in the system. Customers may also experience one or more of the following: Vehicle will fail to start when cold at times. A noise heard from the drivetrain while stationary and vehicle is inSport/Track modes. Extended engine crank times. |
| 1806422 | 2023-01-09. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 - EVAP Pressure Switch Stuck Closed. P0455 - EVAP System Large Leak. P0440 - General EVAP System Failure. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. Customers may also experience the following:Vehicle willfail to start when cold at times. Noise heard from the drivetrain while stationary and vehicle is in Sport/Trackmodes. Extended engine crank times. |
| 1806622 | 2023-01-09. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 - EVAP Pressure Switch Stuck Closed. P0455 - EVAP System Large Leak. P0440 - General EVAP System Failure. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. Customers may also experience one or more of the following: Vehicle will fail to start when cold at times. Noise heard from the drivetrain while stationary and vehicle is in Sport/Trackmodes. Extended engine crank times. |
| 1807422 | 2022-12-19. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 - EVAP Pressure Switch Stuck Closed. P0455 - EVAP System Large Leak. P0440 - General EVAP System Failure. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak VerificationTest (SLVT) to determine if a leak is present in the system. Customers may also comment on one or more of the following: Vehicle will fail to start when cold at times. Noise heard from the drivetrain while stationary and vehicle is in Sport/Track modes. |
| 1806522 | 2022-10-17. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 - EVAP Pressure Switch Stuck Closed. P0455 - EVAP System Large Leak. P0440 - General EVAP System Failure. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT)to determine if a leak is present in the system. Customers may also experience one or more of the following: Vehicle will fail to start when cold at times. A noise heard from the drivetrain while stationary and vehicle is inSport/Track modes. Extended engine crank times. |
| 1806622 | 2022-10-17. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 - EVAP Pressure Switch Stuck Closed. P0455 - EVAP System Large Leak. P0440 - General EVAP System Failure. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. Customers may also experience one or more of the following: Vehicle will fail to start when cold at times. Noise heard from the drivetrain while stationary and vehicle is in Sport/Trackmodes. Extended engine crank times. |
| 0805421 | 2022-09-26. Service bulletin. High Beam Headlamps Flicker This bulletin involves installing jumper wires from the Power Distribution Center(PDC) to the headlamp connectors. The technician may find one or more of the following Diagnostic Trouble Codes (DTCs).B1632-15 - Left High Beam Control-Circuit Short To Battery Or Open. B1636-11 - Right High Beam Control-Circuit Short To Ground. In addition the customer may describe the following:High beam headlamps flicker in cold weather. High beams lamps not working properly in cold weather. |
| 1806522 | 2022-09-26. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 - EVAP Pressure Switch Stuck Closed. P0455 - EVAP System Large Leak. P0440 - General EVAP System Failure. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT)to determine if a leak is present in the system. Customers may also experience one or more of the following: Vehicle will fail to start when cold at times. A noise heard from the drivetrain while stationary and vehicle is inSport/Track modes. Extended engine crank times. |
| 1806422 | 2022-05-31. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 - EVAP Pressure Switch Stuck Closed. P0455 - EVAP System Large Leak. P0440 - General EVAP System Failure. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. Customers may also experience the following:Vehicle willfail to start when cold at times. Noise heard from the drivetrain while stationary and vehicle is in Sport/Trackmodes. Extended engine crank times. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.