Transport Canada recall 2018290
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2018290 |
| Manufacturer's number | RC116 |
| Reported | 2018-06-01 |
| Component | Structure |
| Notification type | Safety Mfr |
| Units potentially affected | 9578 |
What is wrong
On certain vehicles, the power sliding door control module may not be calibrated correctly. As a result, a closing door may not stop and reverse direction if blocked by an object, increasing the risk of injury to vehicle occupants. Correction: Dealers will reprogram the power sliding door control module software.
| 2015 KIA SEDONA | |
|---|---|
| 2016 KIA SEDONA | |
| 2017 KIA SEDONA | |
| 2018 KIA SEDONA | |
| 2019 KIA SEDONA |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| CS2312_TSB_R2 | 2026-06-18. Service bulletin. TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 20, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) did receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler. |
|---|---|
| TSB_CS2312_R1 | 2026-02-19. Service bulletin. TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 20, which may not have been equipped with an immobilizer and whole Integrated Body control Unit (IBU) / Body Control Module (BCM) did receive the Ant-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler. |
| CS2312_OWNR | 2026-01-05. Other. CUSTOMER SATISFACTION CAMPAIGN: OWNER NOTIFICATION (CS2312) - This document is the owner notification advising that Kia is conducting Customer Satisfaction Campaign. A software upgrade that addresses the social media theft method has been made available to owners of eligible Kia model vehicles free of charge at authorized Kia dealers since 2023. In addition to the anti-theft software, a new zinc-reinforced ignition cylinder protector hardware upgrade has been developed and can be installed at the ignition cylinder location to provide additional protection against the social media theft method. Because the subject Kia vehicles were not factory-equipped with an engine immobilizer and were previously eligible for the software upgrade, these vehicles are eligible until March 31, 2027, to have the ignition cylinder protector installed—if requested—at no cost through an authorized Kia dealership. (Mailing of these notifications to vehicle owners will be completed from December 17, 2025 through February 27, 2026) |
| TSB_CS2312 | 2025-12-24. Service bulletin. TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 19, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) did receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler. |
| TSB_BOD055_R1 | 2021-10-02. Service bulletin. TECHNICAL SERVICE BULLETIN: INFORMATION FOR HEADLAMP CONDENSATION AND MOISTURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to some Kia models that may exhibit fogging, condensation, and/or moisture inside a headlamp assembly. Generally, a fogging condition is considered normal and can be eliminated by turning on the headlamps with the engine running for up to 30 minutes or during normal driving conditions. Headlamp assembly replacement WILL NOT be necessary in most cases. |
| TSB_BOD301 | 2021-06-25. Service bulletin. TECHNICAL SERVICE BULLETIN: FRONT LATCH LOCKING OF THIRD ROW SEAT - This bulletin provides information to inspect the 3rd row seat inboard latch engagement on some 2019-2020MY Sedona (YP) vehicles, produced from February 18, 2019 through November 15, 2019, and if necessary, replace the rubber damper. Slight up and down seat movement may be felt when the inboard front latch is not properly locking in place, which may be caused by a defective rubber damper inside the latch. |
| TSB_ELE201 | 2020-11-03. Service bulletin. TECHNICAL SERVICE BULLETIN: PARTIAL REPAIR: POWER SLIDING DOOR LOCK RELEASE ACTUATOR AND/OR MANUAL LOCK/UNLOCK ACTUATOR - This bulletin provides the repair procedure to replace the sliding door lock/unlock release actuator on manual and power sliding doors on some 2015 - 2021MY Sedona (YP) vehicles produced from July 24, 2014~ to present, which may exhibit an inoperative door lock/unlock actuator. |
| TSB_BOD194_R2 | 2020-01-04. Service bulletin. TSB: SERVICE ACTION: TAILGATE GAS LIFT INSPECTION AND/OR REPLACEMENT (SA398) - This bulletin provides the procedure to inspect the tailgate gas lift dust covers and if necessary, replace the tailgate gas lift(s) on certain non-power tail gate equipped 2019-2020MY Sedona (YP) vehicles produced between March 04, 2019 through June 25, 2019. |
| TSB_BOD194R1 | 2020-01-04. Service bulletin. TECHNICAL SERVICE BULLETIN: SERVICE ACTION: TAILGATE GAS LIFT INSPECTION AND/OR REPLACEMENT (SA398) - THIS BULLETIN HAS BEEN REVISED TO INCLUDE ADDITIONAL INFORMATION. This bulletin provides the procedure to inspect the tailgate gas lift dust cover and if necessary, replace the tailgate gas lift(s) on non-power tail gate 2019-2020MY Sedona (YP) produced between March 04, 2019 through June 25, 2019, which may exhibit an inoperative tailgate gas lift due to dust cover cracks. |
| TSB_BOD194 | 2020-01-04. Service bulletin. TECHNICAL SERVICE BULLETIN: SERVICE ACTION: TAILGATE GAS LIFT INSPECTION AND/OR REPLACEMENT (SA398) - This bulletin provides the procedure to inspect the tailgate gas lift dust cover and if necessary, replace the tailgate gas lift(s) on non-power tail gate 2019-2020MY Sedona (YP) produced between March 04, 2019 through June 25, 2019, which may exhibit an inoperative tailgate gas lift due to dust cover cracks. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.