Transport Canada recall 2017661
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2017661 |
| Manufacturer's number | T84 |
| Reported | 2017-12-21 |
| Component | Brakes |
| Notification type | Safety Mfr |
| Units potentially affected | 204 |
What is wrong
Certain vehicles may have been manufactured with contaminated brake fluid reducing the braking performance of the vehicle. This could result in longer stopping distances, which would increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the brake system and replace it as necessary.
| 2018 ALFA ROMEO GIULIA | |
|---|---|
| 2018 ALFA ROMEO STELVIO |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| S1705000002 REV.A | 2025-01-28. Service bulletin. Front Brake Pulsation and/or Clunk Noise |
|---|---|
| 9003293 | 2022-08-08. Service bulletin. A/C Pressure Transducer A/C inoperative and diagnosis leads to pressure transducer. Call Steve Rice at cell (248) 867-0061 before replacing the pressure transducer. If no response in 15 minutes, please proceed with repair. |
| 18-026-20 | 2020-05-26. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Engine Control Module (ECM), also known as a PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs have been set:P0106-00 - Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance. P013A-00 - O2 Sensor Slow Response Rich To Lean Bank 1 Sensor 2. P015A-00 - O2 Sensor Delayed Response Rich To Lean Bank 1 Sensor 1. P1CEA-00 - Boost Side EVAP Purge System Performance. P0096-00 - Intake Air Temperature Sensor 2 Circuit Range-Performance. P04DB-00 - Crankcase Ventilation System Disconnected. P024A-00 - Charge Air Cooler Bypass Control "A" Range/Performance. P2097-00 - Post Catalyst Fuel Trim System Rich. P2B2F-00 - Fan 1 Performance/Stuck Off. P24D6-00 - EVAP System Pressure Sensor/Switch "B" Circuit Range/Performance. P01BA-00 - Engine Oil Temperature Sensor "B" Range/Performance. P026E-00 - Charge Air Cooler Coolant Pump Performance. P164E-00 - A/C Clutch Relay Control Range/Performance. P0191-00 - Fuel Rail Pressure Sensor "A" Circuit Range/Performance. P2299-00 - Brake Pedal Position/Accelerator Pedal Position Incompatible. U1008-00 - LIN 1 BUS. Customers may experience one or more of the following:Not passing vehicle certification during state inspections if performed after a system reset. Driveability issues. Engine misfire when cold. In addition, the following improvements are also available:Turbo coolant pump after run duration and on-off strategy update, to improve turbo O-ring durability. Message ?S&S Not Available? will be changed to ?Hood Open?. Improved idle stability during tip in tip out. Improved idle stability during an Engine Start Stop (ESS) event. |
| 18-026-20 | 2020-04-27. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Engine Control Module (ECM), also known as a PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs have been set:P0106-00 - Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance. P013A-00 - O2 Sensor Slow Response Rich To Lean Bank 1 Sensor 2. P015A-00 - O2 Sensor Delayed Response Rich To Lean Bank 1 Sensor 1. P1CEA-00 - Boost Side EVAP Purge System Performance. P0096-00 - Intake Air Temperature Sensor 2 Circuit Range-Performance. P04DB-00 - Crankcase Ventilation System Disconnected. P024A-00 - Charge Air Cooler Bypass Control "A" Range/Performance. P2097-00 - Post Catalyst Fuel Trim System Rich. P2B2F-00 - Fan 1 Performance/Stuck Off. P24D6-00 - EVAP System Pressure Sensor/Switch "B" Circuit Range/Performance. P01BA-00 - Engine Oil Temperature Sensor "B" Range/Performance. P026E-00 - Charge Air Cooler Coolant Pump Performance. P164E-00 - A/C Clutch Relay Control Range/Performance. P0191-00 - Fuel Rail Pressure Sensor "A" Circuit Range/Performance. P2299-00 - Brake Pedal Position/Accelerator Pedal Position Incompatible. U1008-00 - LIN 1 BUS. Customers may experience one or more of the following:Not passing vehicle certification during state inspections if performed after a system reset. Driveability issues. Engine misfire when cold. In addition, the following improvements are also available:Turbo coolant pump after run duration and on-off strategy update, to improve turbo O-ring durability. Message ?S&S Not Available? will be changed to ?Hood Open?. Improved idle stability during tip in tip out. Improved idle stability during an Engine Start Stop (ESS) event. |
| 08-044-19 | 2019-07-15. Service bulletin. Flash: Anti-Lock Brake System (ABS) Module Diagnostic and System Updates This bulletin involves reprogramming the ABS module with the latest available software. The following enhancement is included with this update:Improved brake pedal feel. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.