Transport Canada recall 2017614
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2017614 |
| Manufacturer's number | R0136 (71C119) |
| Reported | 2017-12-08 |
| Component | Brakes |
| Notification type | Safety Mfr |
| Units potentially affected | 103556 |
What is wrong
On certain vehicles, the brake pedal stopper pad material could deteriorate over time and allow the stop lamp switch plunger to remain extended when the brake pedal is released. This could result in the stop lamps illuminating continuously, which would result in following road users being unaware of the driver's intentions. Additionally, it could result in activation of the engine management system's brake pedal override feature, the illumination of the traction control warning lamp, and/or the ability to move the shift lever without depressing the brake pedal, which could result in unintended vehicle movement. These conditions could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the brake pedal stopper pad.
| 2013 HYUNDAI ELANTRA | |
|---|---|
| 2014 HYUNDAI ELANTRA | |
| 2013 HYUNDAI ELANTRA GT | Listed as a series or trim of this model. |
| 2014 HYUNDAI ELANTRA GT | Listed as a series or trim of this model. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 21-BR-002H | 2021-04-07. Service bulletin. This bulletin provides best practice recommendations when performing brake service procedures. |
|---|---|
| 20-BR-002H | 2020-12-08. Service bulletin. This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area. |
| 20-AT-011H | 2020-04-07. Service bulletin. If you are servicing an applicable vehicle with a “Check Engine” light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and oil pressure harness. |
| 5NP-Y6K2G-10 | 2016-10-18. Service bulletin. "HYUNDAI MOTOR AMERICA IS CONDUCTING RECALL 146 TO REPLACE THE BRAKE PEDAL STOPPER ON CERTAIN 2013 MODEL YEAR ELANTRA VEHICLES. RECALL 146 PROVIDES A PROCEDURE TO REPLACE THE BRAKE PEDAL STOPPER." |
| 5NP-U7B6K-10 | 2016-10-14. Service bulletin. "THE BRAKE PEDAL STOPPER PAD IS LOCATED BETWEEN THE STOP LAMP SWITCH AND THE BRAKE PEDAL ARM. THE BRAKE PEDAL STOPPER PAD MATERIAL IN THE AFFECTED VEHICLES CAN DETERIORATE ALLOWING THE STOP LAMP SWITCH PLUNGER TO REMAIN EXTENDED WHEN THE BRAKE PEDAL IS RELEASED. A DETERIORATED PAD CAN RESULT IN THE STOP LAMPS ILLUMINATING CONTINUOUSLY, ILLUMINATION OF THE TRACTION CONTROL WARNING LAMP, THE ABILITY TO MOVE THE SHIFT LEVER WITHOUT DEPRESSING THE BRAKE PEDAL, OR ACTIVATION OF THE ENGINE MANAGEMENT SYSTEM’S BRAKE PEDAL OVERRIDE FEATURE. ANY OF THE DESCRIBED SYMPTOMS CAN INCREASE THE RISK OF A CRASH." |
| SB-12-01-036-1 | 2016-06-17. Service bulletin. SUMMARY TO BE PROVIDED ON A FUTURE DATE. |
| 13-AT-014-1 | 2016-03-31. Service bulletin. SUMMARY TO BE PROVIDED ON A FUTURE DATE. |
| 13-AT-014 | 2016-03-31. Service bulletin. SUMMARY TO BE PROVIDED ON A FUTURE DATE. |
| 12-01-036 | 2016-03-16. Service bulletin. SUMMARY TO BE PROVIDED ON A FUTURE DATE. |
| 12-01-036-1 | 2016-03-16. Service bulletin. SUMMARY TO BE PROVIDED ON A FUTURE DATE. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.