Transport Canada recall 2016622
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2016622 |
| Manufacturer's number | SRC R30 |
| Reported | 2016-12-13 |
| Component | Airbag |
| Notification type | Safety Mfr |
| Units potentially affected | 1 |
What is wrong
On certain vehicles, incorrect fasteners (tapping screws) that attach the front passenger knee air bag module to the lower instrument panel may have been installed during vehicle assembly. This could damage the knee air bag module mounting holes and result in the fasteners loosening over time. A loosened fastener could affect the performance of the knee air bag in a crash (where deployment is warranted), and could increase the risk of injury to the seat occupant. Correction: Dealers will inspect and confirm that the correct fasteners were used. If not, the dealer will remove the air bag assembly, replace the instrument panel brace and body bracket, and reinstall the air bag with correct fasteners.
| 2017 TOYOTA CAMRY |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| TSB003220 | 2023-10-16. Service bulletin. TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate. |
|---|---|
| T-SB-0094-21 Rev | 2022-12-19. Service bulletin. TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process. |
| Toyota Safety Re | 2021-04-19. Service bulletin. Toyota Safety Recall and Service Campaign - Technician Certification Requirements |
| T-SB-0218-17_Rev | 2018-04-02. Service bulletin. TSB: REVISION NOTICE July 20, 2017 Rev1: Applicability has been updated to exclude 2007 ? 2017 model year Avanza vehicles. Some hazardous material treatment and handling regulations at the state and local level define the pre-disposal deployment of airbag and pre-tensioner assemblies as hazardous material treatment. Hazardous material treatment may require special training, certification or licensing in certain areas. TMS recommends that dealership personnel carefully review and follow ALL local and state regulations, and where necessary, contract with Environmental Protection Agency (EPA) Licensed Hazardous Waste Transportation and Disposal facilities. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.