Transport Canada recall 2016060
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2016060 |
| Manufacturer's number | R0107 (61C008) |
| Reported | 2016-02-08 |
| Component | Powertrain |
| Notification type | Safety Mfr |
| Units potentially affected | 2201 |
What is wrong
On certain vehicles equipped with automatic transmissions, the transmission’s fluid cooler hose may have been improperly manufactured. This could result in transmission fluid leaking from the hose, and cause abnormal transmission shifts and/or illumination of the instrument cluster malfunction indicator lamp. If enough fluid is lost, the loss of hydraulic pressure to the transaxle could cause a loss of motive power, increasing the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the cooler hose with the revised hose.
| 2011 HYUNDAI TUCSON |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 24-AT-002H | 2024-04-16. Service bulletin. This TSB provides a procedure to diagnose and replace, if necessary, an automatic transmission with Incorrect Ratio DTC (transmission clutch slip in gear above limit) listed on Page 2. |
|---|---|
| 23-01-014H-5 | 2023-09-06. Service bulletin. Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers. |
| 20-AT-017H | 2020-06-06. Service bulletin. If you are servicing an applicable vehicle with the following symptoms and DTC, follow the Service Procedure on Page 4. • Check Engine light on • DTC P0880/P088000 - TCM Power signal error open/short • Transmission stuck in 4th gear fail-safe • Harsh shift into Reverse and Drive |
| 20-AT-016H | 2020-05-07. Service bulletin. The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions: |
| 20-AT-014H | 2020-05-07. Service bulletin. If you are servicing an applicable vehicle with a “Check Engine” light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and oil pressure harness. |
| 20-AT-008H | 2020-03-07. Service bulletin. If you are servicing an applicable vehicle with a “Check Engine” light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and oil pressure harness. |
| 20-AT-001H | 2020-02-03. Service bulletin. This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear). |
| 19-AT-021H-1 | 2020-01-21. Service bulletin. If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. ? PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). ? FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so, replace the transmission. |
| 19-AT-015H | 2019-09-30. Service bulletin. If you are servicing an applicable vehicle with a ?Check Engine? light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and oil pressure harness |
| 19-AT-012H | 2019-07-29. Service bulletin. This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear). |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.