Transport Canada recall 2015513
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2015513 |
| Manufacturer's number | HM54 |
| Reported | 2015-10-29 |
| Component | Airbag |
| Notification type | Safety Mfr |
| Units potentially affected | 17 |
What is wrong
On certain vehicles, the airbag inflator contained in the driver frontal airbag module may have been improperly stamped and/or contains a defect in the material used to manufacture the airbag inflator's metal housing, which, in the event of airbag deployment, may cause inflator components to separate. If the inflator components separate, this could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the driver frontal airbag module. Note: All affected units are still in the possession of dealers, and will be corrected before delivery.
| 2016 HONDA CR-V |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SB15059 | 2021-12-13. Service bulletin. Front Passenger's Airbag Inflator Collection - This bulletin has been cancelled because the collection is now complete. |
|---|---|
| A18-058 | 2018-07-02. Service bulletin. Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement driver's airbag inflator only. |
| A15-081 | 2017-05-24. Service bulletin. "SERVICE BULLETIN - THE CURRENT DEFECT THINKING IS THAT THE AIRBAG INFLATOR WHICH IS PART OF THE DRIVER'S AIRBAG MODULE MAY HAVE BEEN IMPROPERLY STAMPED. ALSO, IT COULD CONTAIN A DEFECT IN THE MATERIAL USED TO MANUFACTURE THE AIRBAG INFLATOR'S METAL HOUSING WHICH, IN THE EVENT OF AN AIRBAG DEPLOYMENT, COULD CAUSE INFLATOR COMPONENTS TO SEPARATE. IF THE INFLATOR COMPONENTS SEPARATE, METAL FRAGMENTS COULD PASS THROUGH THE AIRBAG CUSHION MATERIAL POSSIBLY CAUSING INJURY OR FATALITY TO VEHICLE OCCUPANTS." |
| DLR MSG - HONDA | 2017-05-24. Service bulletin. "DEALER MESSAGE - ON OCTOBER 28, 2015, AMERICAN HONDA NOTIFIED NHTSA OF A SAFETY RECALL FOR APPROXIMATELY 515 MODEL YEAR 2016 CR-V VEHICLES DUE TO DRIVER'S AIRBAG MODULES THAT MAY DEPLOY ABNORMALLY. ANY NEW OR USED UNITS IN DEALER STOCK MUST BE REPAIRED PER SERVICE BULLETIN, 15-081, SAFETY RECALL: 2016 CR-V DRIVER’S AIRBAG MODULE , PRIOR TO SALE. REFER TO YOUR ERESPONSIBILITY REPORT OR VIN INQUIRY TO DETERMINE WHICH UNITS IN YOUR INVENTORY ARE AFFECTED. AMERICAN HONDA MOTOR CO. EXPECTS TO BEGIN INITIAL CUSTOMER NOTIFICATION IN DECEMBER 2015." |
| A15-081 | 2017-05-23. Service bulletin. SERVICE BULLETIN - THE METAL HOUSING SURROUNDING THE DRIVER'S AIR BAG INFLATOR IN THESE VEHICLES MAY HAVE BEEN MANUFACTURED INCORRECTLY. IN THE EVENT OF A CRASH NECESSITATING DEPLOYMENT OF THE DRIVER'S FRONT AIR BAG, THE INFLATOR COULD RUPTURE WITH METAL FRAGMENTS STRIKING THE DRIVER OR OTHER OCCUPANTS RESULTING IN SERIOUS INJURY OR DEATH. |
| DLR MSG - HONDA | 2017-05-23. Service bulletin. "DEALER MESSAGE - ON OCTOBER 28, 2015, AMERICAN HONDA NOTIFIED NHTSA OF A SAFETY RECALL FOR APPROXIMATELY 515 MODEL YEAR 2016 CR-V VEHICLES DUE TO DRIVER'S AIRBAG MODULES THAT MAY DEPLOY ABNORMALLY. ANY NEW OR USED UNITS IN DEALER STOCK MUST BE REPAIRED PER SERVICE BULLETIN, 15-081, SAFETY RECALL: 2016 CR-V DRIVER’S AIRBAG MODULE , PRIOR TO SALE. REFER TO YOUR ERESPONSIBILITY REPORT OR VIN INQUIRY TO DETERMINE WHICH UNITS IN YOUR INVENTORY ARE AFFECTED. AMERICAN HONDA MOTOR CO., INC. EXPECTS TO BEGIN INITIAL CUSTOMER NOTIFICATION IN DECEMBER 2015." |
| DEN-K3Q5J-06 | 2016-08-10. Service bulletin. THIS COMMUNICATION IS INFORMING HONDA OF A DELAMINATION ISSUES WITHIN AN I.C. PRODUCED BY NXP AND ASSEMBLED INTO AIRBAG SENSOR SUPPLIED BY DENSO INTERNATIONAL AMERICA, INC. THIS DELAMINATION ISSUE MANIFESTS ITSELF AS AN OPEN CIRCUIT WITHIN THE SENSOR, CAUSING A DTC TO BE SET ON THE VEHICLE ALONG WITH A DECLARING “AIRBAG” LIGHT. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.