Transport Canada recall 2015247
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2015247 |
| Manufacturer's number | 8215F |
| Reported | 2015-06-04 |
| Component | Airbag |
| Notification type | Superseded |
| Units potentially affected | 57861 |
What is wrong
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the airbag module. Note: This recall is superseded by recall 2018-036. Please see recall 2018-036 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018036">Click here for more information</a>.
| 2004 MAZDA MAZDA6 | |
|---|---|
| 2005 MAZDA MAZDA6 | |
| 2006 MAZDA MAZDA6 | |
| 2007 MAZDA MAZDA6 | |
| 2008 MAZDA MAZDA6 | |
| 2006 MAZDA MAZDASPEED6 | |
| 2007 MAZDA MAZDASPEED6 | |
| 2004 MAZDA RX-8 | |
| 2005 MAZDA RX-8 | |
| 2006 MAZDA RX-8 | |
| 2007 MAZDA RX-8 | |
| 2008 MAZDA RX-8 |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 1500115 | 2022-06-06. Service bulletin. LDWS or ALH warning light on with DTC C1001:92 |
|---|---|
| 0800116 | 2022-06-06. Service bulletin. Passenger fAirbag deactivation (PAD) indicator light illumination |
| SSPB3 | 2021-06-01. Service bulletin. Subject: ** UPDATE** - Takata Inflator Special Service Program (Extended Warranty) Special Service Program SSPB3: In December 2017 Special Service Program SSPB3 - Takata Inflator Extended Warranty was announced. The extended warranty was a result of the Takata airbag inflator class action settlement. Mazda will provide supplemental warranty coverage for all repairs and replacements (including parts and labor) to correct any defects in the materials or workmanship of Takata airbag inflators and the replacement inflators installed pursuant to the Takata airbag recalls. The program covers defects in the Inflator only and does not cover other items in the airbag system. Additionally, the program also does not cover airbags that have properly deployed as a result of a collision. |
| 08-001-19-3544 | 2019-02-19. Service bulletin. This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service. |
| 08-001-18-3457 | 2018-05-14. Service bulletin. This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service. |
| MT-003-18 | 2018-04-23. Service bulletin. The Workshop Manual has two-different airbag procedures, one for Standard Deployment and one for Two-Step Deployment. Standard Deployment is for Mexico spec vehicles and Two-Step Deployment is for US and Canadian spec vehicles. |
| 08-003-17-3345 | 2017-10-21. Service bulletin. Mazda Motor Corporation is going to evaluate the following inflators to ensure the safety of the inflator with a desiccant. In order to do this, MNAO is collecting inflators for evaluation in certain zones. For 2003-2008 Mazda6 (including Mazdaspeed6) and 2004-2011 RX-8: Collect 30 Driver-side and 30 Pas-senger-side inflators (60 total) from vehicles that have completed Recall 8215F for Driver-side and Recall 9416E for Passenger-side airbags in the following zones. For 2010-2013 Mazda3: Collect 200 Passenger-side inflators from vehicles in the following zones. |
| SA-068-17 | 2017-10-12. Service bulletin. STOPPER PLATES FOR AIR BAG MODULE CONNECTORS HAVE BEEN ESTABLISHED AS NEW SERVICE PARTS. When removing the connector (1) to the air bag module (2), make sure to first lift the stopper plate (3) carefully using a flathead screwdriver (but do not remove it), and then pull out the connector. |
| 17-04 | 2017-08-10. Service bulletin. A newly established short cord (P/N GAY2-67-SH0) has been released if a connector is broken when performing Recall 9416E. |
| 08-001-13-2859 | 2017-08-10. Service bulletin. This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination con-cerns during vehicle service. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.