Transport Canada recall 2014292
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2014292 |
| Reported | 2014-07-10 |
| Component | Seats And Restraints |
| Notification type | Safety Mfr |
| Units potentially affected | 187 |
What is wrong
On certain crew-cab vehicles, incorrect anchor nuts may have been installed on rear seat belt attachment points. This could affect seat belt mounting, potentially resulting in seat belt separation in a crash, which could increase the risk of injury and/or damage to property. Correction: Dealers will inspect the seat belt weld nuts and repair as necessary.
| 2014 NISSAN FRONTIER |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| NTB16-103D | 2022-01-08. Service bulletin. MANUAL SEAT TRACK ADJUSTMENT DOES NOT LOCK INTO POSITION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
|---|---|
| NTB15036 | 2021-05-10. Service bulletin. SERVICE INFORMATION The applied vehicles are equipped with automatic door locks that lock all doors when the vehicle speed reaches 15 MPH. There is no instruction in the Owner?s Manual on auto-lock function deactivation. All doors unlock automatically when the ignition is placed in the OFF position (models with Intelligent Key system) or when the key is removed from the ignition switch (models without Intelligent Key system). The auto-unlock function can be deactivated by the driver in accordance with Owner?s Manual Instructions. Please see this bulletin for further details. |
| PC307 | 2021-05-10. Service bulletin. Nissan is placing a Quality Hold on 1,218 specific 2014 Frontier Crew Cab vehicles and requesting dealers inspect the weld nut for the rear outboard seatbelt anchor bolts on vehicles identified in SERVICE COMM. |
| NTB16-103c | 2021-01-09. Service bulletin. 2014 – 2020 FRONTIER; MANUAL SEAT TRACK ADJUSTMENT DOES NOT LOCK INTO POSITION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| NTB16-103b | 2019-03-25. Service bulletin. 2014 ? 2019 FRONTIER; MANUAL SEAT TRACK ADJUSTMENT DOES NOT LOCK INTO POSITION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| NTB16-103a | 2017-12-22. Service bulletin. 2014 ? 2018 FRONTIER; MANUAL SEAT TRACK ADJUSTMENT DOES NOT LOCK INTO POSITION This bulletin applies to vehicles equipped with manual front seat. This bulletin has been amended. The APPLIED VEHICLE section has been revised. No other changes have been made. Please discard previous versions of this bulletin. |
| NTB16-103 | 2017-08-01. Service bulletin. 2014 - 2016 FRONTIER; MANUAL SEAT TRACK ADJUSTMENT DOES NOT LOCK INTO POSITION IF YOU CONFIRM The seat track latching pawls for a front seat (left or right) are not synchronized: - The inboard track latches, but the outboard track does not latch unless the seat is pushed/pulled into position. NOTE: The customer may report the following if this issue should occur: - The seat track seems loose when braking or accelerating. - The seat track is difficult to lock in place. - After adjusting the seat track, it shifts/locks into place while driving. ACTION Adjust/synchronize the outboard seat track per the Service Procedure is this bulletin. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.