Transport Canada recall 2014247
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2014247 |
| Manufacturer's number | SR14-006 |
| Reported | 2014-06-25 |
| Component | Steering |
| Notification type | Safety Mfr |
| Units potentially affected | 1635 |
What is wrong
Certain 2013 model year vehicles with a 6-speed automatic transmission may have been manufactured with insufficient clearance between the power steering pressure tube and the bosses on the converter housing of the automatic transaxle. This may cause the power steering pressure tube to rust from abrasive contact between the two components. In the worst case, a pin hole could develop and allow for power steering fluid leakage, which can result in the loss of power steering assist and increase the risk of crash causing injury and/or property damage. Correction: Dealers will replace the power steering pressure tube and return tube. Note: Only a limited number of 2007 to 2012 model year vehicles equipped with a replacement automatic transaxle with the bosses on the converter housing are included in the recall population.
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SR-20-003REV_2 | 2020-10-08. Service bulletin. Revision to previous TSB SR-20-003 for the Crossmember recall. Added Warranty information for instances where subframe may fail and cause additional damage to unrelated parts. This bulletin provides directions for inspection and repair of affected vehicles' Crossmembers. |
|---|---|
| TIN-20-SR-003REV | 2020-10-08. Service bulletin. Technical Information Notice sent to dealerships to advise ofrevision changes to TSB "SR-20-003REV_2" |
| TT194 | 2020-01-24. Service bulletin. This is a service newsletter (Tech Talk) that was sent out to dealers. |
| TT195 | 2020-01-24. Service bulletin. This is a service newsletter (Tech Talk) that was sent out to dealers. |
| TSB-19-37-001 | 2019-03-18. Service bulletin. This is a Technical Service Bulletin that was sent to dealers. The bulletin updates the Steering section of the affected Service Manuals to update the lubricant, sealant, special tools, and procedures used in replacement of the Tie Rod End Ball Joint Dust Cover, which are now serviceable parts, for vehicles with hydraulic power steering. |
| TSB-12-35-002 | 2012-10-15. Service bulletin. MITSUBISHI: ON SOME VEHICLES, AN ACTIVE STABILITY CONTROL (ASC) STEERING WHEEL SENSOR HAS BEEN INSTALLED, REPLACING ORIGINAL SENSOR. NEW SENSOR NOT TO BE ROTATED BEFORE INSTALLATION. MODELS 2007-12 OUTLANDER, 2008-11 LANCER EVOLUTION, 2010-12 LANCER/LANCER SPORTBACK & GALANT, 2008-12 ECLIPSE/ECLIPSE SPYDER, 2004-11 ENDEAVOR. *PE |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.