Transport Canada recall 2014008
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2014008 |
| Reported | 2014-01-16 |
| Component | Engine |
| Notification type | Safety Mfr |
| Units potentially affected | 338 |
What is wrong
On certain model motorcycles, the throttle butterfly valve can deviate from its intended position. This could result in engine stalling which, in conjunction with traffic, road conditions, and driver's reactions, could increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the engine control unit with one having the latest software and calibration.
| 2012 TRIUMPH TIGER EXPLORER | Listed as a series or trim of this model. |
|---|---|
| 2013 TRIUMPH TIGER EXPLORER | Listed as a series or trim of this model. |
| 2014 TRIUMPH TIGER EXPLORER | Listed as a series or trim of this model. |
| 2013 TRIUMPH TIGER EXPLORER SPOKE | Listed as a series or trim of this model. |
| 2014 TRIUMPH TIGER EXPLORER SPOKE | Listed as a series or trim of this model. |
| 2013 TRIUMPH TROPHY SE | Listed as a series or trim of this model. |
| 2014 TRIUMPH TROPHY SE | Listed as a series or trim of this model. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SMT-TN-166 | 2021-05-10. Service bulletin. Crackshaft position sensor/ignition pickup, front brake hose p-clip, headlight fixings, reed valve cover torque fixing, engine bar plugs, lower yoke wire guide, front fork oil level and volume, motorcycle assembly guide update-backrest bar, rear bevel box parts kit, and pannier frame. |
|---|---|
| SMT-TN-154 | 2021-05-10. Service bulletin. If a customer reports excessive top-end engine noise on an engine fitted to the above models up to VIN 602960, the dealer is requested to replace the cylinder head with a new cylinder head and camshaft drive chain tensioner following the procedure listed below. |
| SMT-TN-153 | 2021-05-10. Service bulletin. If a Trophy or Trophy SE customer reports excessive top-end engine noise (a ticking and or knocking noise) on an engine fitted to the above models up to VIN 602960, the dealer is requested to arrange the return of the motorcycle to Triumph Motorcycles to permit factory repairs. This will include either a modification to the existing cylinder head or replacement cylinder head and replacement camshaft drive chain tensioner. |
| SMT-TN-145 | 2021-05-10. Service bulletin. If a Tiger Explorer customer reports excessive top-end engine noise (a ticking and or knocking noise) on an engine fitted to the above models up to VIN 602960, the dealer is requested to arrange the return of the motorcycle to Triumph Motorcycles to permit factory repairs. This will include either a modification to the existing cylinder head or replacement cylinder head and replacement camshaft drive chain tensioner. |
| SMT-TN-144 | 2021-05-10. Service bulletin. If a customer reports excessive top-end engine noise on an engine fitted to the above models up to VIN 602960, the dealer is requested to replace the cylinder head with a new cylinder head and camshaft drive chain tensioner following the procedure listed below. |
| SMT-TN-139 | 2021-05-10. Service bulletin. A new sliding selector shaft and detent assembly has been introduced on the above models from engine number 563847. The new shaft is secured into the crankcase with E-clips and is not retrofittable. When ordering replacement parts, always refer to EPC. |
| SMT-TB201-20DEC2 | 2020-01-21. Service bulletin. Technical Bulletin 200 provides instructions that apply to Steering Lock and Keys, Neutral Position Adaption, Triumph Diagnostic Tool - End of Support for Microsoft Windows 7®, Triumph Diagnostic Tool - Internet Connection and Minimum eEquipment Requirement, Torque Change, Clutch Cable, Camshaft Frame Installation, Immobiliser Antenna Wire Routing. |
| SMT-TN 159 1 Oct | 2017-11-03. Service bulletin. Technical service bulletin 159 addressing 19 service instructions, some of which apply to all models. Instructions relate to piston and piston top ring, alternator rotor retaining bolt, rear brake hose guide, auxiliary lights, headlight spares, gear selector drum and neutral light switch, pulser ring fixings, side stand fixing, battery terminal cover, heated grip fixings, headstock bearing adjustment, front and rear diretion indicator fixings, swinging arm, throttle linkage cleaning, headlight label, clutch lifter piece, rear brake caliper bleed nipple and owner's handbook. |
| SMT-TN 157 1 May | 2017-11-03. Service bulletin. Technical service bulletin 157 addressing 10 service instructions. Instructions relate to fork oil level, service manual amendment, torque change, seat infill panel locating lug fixings, harness, gear position sensor and harness/gear position sensor parts kit, torque change, M10 ABS hard line unions, front fork disassembly and assembly, new packing crate and footboard reassembly, main frame parts kit, torque change, clutch cover fixings, ABS front brake line. |
| SMT-TN 155 1 Feb | 2017-11-03. Service bulletin. Technical service bulletin 155 addressing 9 service instructions, some of which apply to all models. Instructions relate to the upper drive belt guard, catalytic converter mounting bracket, torque figures updates, horn fixing, centre stand fixings, front brake hose clip, clutch cover kits, breather cover fixings and audio systems. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.