WenmarOpen by Wenmar Pro

Transport Canada recall 2013201

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

Campaign
Published byTransport Canada (Canada)
Campaign number2013201
Manufacturer's numberN35
Reported2013-06-07
ComponentLights And Instruments
Notification typeCompliance Mfr
Units potentially affected11539

What is wrong

Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard 108 - Lighting and Retroreflective Devices. The vehicles may not give notification of a turn signal malfunction, as is required by the standard. The absence of notification of a turn signal malfunction could, in conjunction with traffic and road conditions, and driver reactions, increase the risk of a crash causing personal injury and/or damage to property. Correction: Dealers will reconfigure the central body controller.

Vehicles this campaign lists
2013 RAM 1500
2013 RAM 2500
2013 RAM 3500

A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.

Bulletins for the same vehicles and component

Bulletins for the same vehicles and component
S1625000003 Rev.2023-02-13. Service bulletin. Malfunction Indicator Lamp (MIL) Illumination. NOx Sensor Diagnostic Trouble Codes (DTCs) Diagnosis Information.
18-038-162022-10-24. Service bulletin. P20EE SCR NOX Catalyst Efficiency Below Threshold Bank 1 This bulletin involves verifying the proper operation of the Diesel Exhaust Fluid (DEF) system and, if necessary, replacing the Selective Catalyst Reduction (SCR) Catalyst assembly. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find Diagnostic Trouble Code (DTC) P20EE SCR NOX Catalyst Efficiency Below Threshold Bank 1 set in the Powertrain Control Module (PCM) memory.
18-091-162022-09-26. Service bulletin. Flash: Powertrain Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set. Several software improvements are available for the following conditions. The Following DTC has been changed from a two trip fault to a one trip fault: · U1A24 - Lost Communication With Ammonia Sensor. Prevent or reduce MIL illumination when no defect is present for the following DTCs. These faults have been changed from a one trip fault to a two trip fault: · P0201 - P0206 - Fuel Injector X Circuit/Open. · P049D - EGR Control Position Exceeding Learning Limit. · P0711 - Transmission Temperature Sensor Performance. · P0712 - Transmission Temperature Sensor Low. · P0713 - Transmission Temperature Sensor High. · P0714 - Transmission Temperature Sensor Intermittent. · P0740 - TCC Out Of Range. · P0869 - Line Pressure High. · P0933 - Hydraulic Pressure Sensor Range/Performance. · P0934 - Line Pressure Sensor Circuit Low. · P0935 - Line Pressure Sensor Circuit High. · P1775 - Solenoid Switch Valve Latched In TCC Position. · P1776 - Solenoid Switch Valve Latched In LR Position. · U0100 - Lost Communication With ECM/PCM. · U0002 - CAN C Bus Off performance - Bus Off. · **P2281 - Air Leak Between MAF And Throttle Body. · P218F - Reductant No Flow Detected. · P242F - Diesel Particulate Filter Restriction - Ash Accumulation. · P20E8 - (Diesel Exhaust Fluid) Reductant Pressure Too Low. · P202E - Diesel Exhaust Fluid) Reductant Injector Performance. · P209F - Diesel Exhaust Fluid) Reductant Tank Heater Control Circuit Performance. · P218F - Reductant No Flow Detected.** · P205E - (Diesel Exhaust Fluid) Reductant Tank Temperatur
1803014REVB2022-09-26. Service bulletin. Flash: 6.7L Diagnostic and System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. Several software improvements are available for vehicles equipped with a Cummins 6.7L turbo Diesel.Prevent Or Reduce Malfunction Indicator Lamp (MIL) Illumination When No Defect is Present For The Following Diagnostic Trouble Codes (DTCs). These Faults Have Been Changed From P0201 - P0206 - Fuel Injector X Circuit/Open. P049D - EGR Control Position Exceeding Learning Limit. P0711 - Transmission Temperature Sensor Performance. P0712 - Transmission Temperature Sensor Low. P0713 - Transmission Temperature Sensor High. P0714 - Transmission Temperature Sensor Intermittent. P0740 - TCC Out Of Range. P0869 - Line Pressure High. P0933 - Hydraulic Pressure Sensor Range/Performance. P0934 - Line Pressure Sensor Circuit Low. P0935 - Line Pressure Sensor Circuit High. P1775 - Solenoid Switch Valve Latched In TCC Position. P1776 - Solenoid Switch Valve Latched In LR Position. U0100 - Lost Communication With ECM/PCM. U0002 - CAN C Bus Off performance - Bus Off. U110E - Lost Ambient Temperature Message.The Following DTC Has Been Changed From A Two Trip Fault To One Trip Fault: U1A24 - Lost Communication With Ammonia Sensor.Improvements To Prevent Or Reduce Malfunction Indicator Lamp (MIL) Illumination When No Defect Is Present For: U3017 - Control Module Timer/Clock Performance. P026B - Injection Timing Performance. P0128 - Thermostat Rationality. In cold ambient temperatures. P0087 - Fuel Rail Pressure Too Low. P2281 - Air Leak Between MAF and Throttle Body. U1421 - Implausible Ignition Key Off Time Received. P026A - Charge Air Cooler Efficiency Below Threshold. P04DB - Crankcase Ventilation System Disconnected. P0544 - Exhaust Gas Temperature Sensor Circuit - Bank 1 Sensor 1. P0562 - Battery Voltage Low. P0604 - Internal Control Module RAM Error. P1451 - Diesel Particulate Filter
18077142022-09-26. Service bulletin. Flash: 3.6L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one of the following Diagnostic Trouble Code has been set: P0607 - ECU Internal Performance P2096 - Downstream Fuel Trim System 1 Lean. P2097 - Downstream Fuel Trim System 1 Rich. P2098 - Downstream Fuel Trim System 2 Lean. P2099 - Downstream Fuel Trim System 2 Rich. Scan tool improved accuracy on mode 6, cylinder imbalance.
1400114REVB2022-09-26. Service bulletin. Fuel Gelling in Cold Ambient Temperatures This bulletin involves reconfiguring the Body Control Module (BCM). Some customers may experience a Malfunction Indicator Lamp (MIL) due to fuel related Diagnostic Trouble Code (DTC) and/or may have a hard or no start condition due to fuel gelling in cold ambient temperatures (20°F or -7°C) or below. DTCs, such as P0087, P0191 or P026B (or other DTCs) may have been set.frame mounted fuel filter heater not to function. The condition is due to a configuration setting in the Body Control Module (BCM).
25001212022-09-26. Service bulletin. Dual EVAP System Extreme Duty Vapor Canister Filter Kit This informational bulletin is to make technicians aware that an EVAP dual vapor canister filter kit(Mopar part #68478013AA)is available in place of the OEM single vapor canister filter.This kit should not be installed on vehicles driven in normal conditions that are not subjected to the below symptom/conditions. Customers operating fleet or severe/extreme duty gasoline vehicles in continuous dusty driving conditions can plug the single OE filter system and may experience a Malfunction Indicator Lamp (MIL) illumination. Upon furtherinvestigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set:P0441 - EVAP Purge System Performance. P062A - Fuel Pump Control Performance. Customers may also experience the following conditions:Hard to fill fuel tank with fuel. Premature shut-off of the gas nozzle when refueling. Flow back of fuel while refueling.
21017192022-09-15. Service bulletin. Flash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the followingDTC has been set:U1111-00 - Lost Odometer Message(DD, DF, and DP with Diesel Engine Only). In addition, the customer may notice one or more of the following conditions: The customer may notice a harsh 2-3 and/or 3-4 shift(2017 MY D2 with ETK 6.7L Diesel and DF2 Transmission Only). 1-2 hard shift. 3-4 flare issue fix. Trans quick learn fix(Gas Engine Only). Transmission oil temperature light illumination during high engine and tow loads. Less than desired towing performance while using cruise control. Harsh engagement while shifting from neutral to drive, neutral to reverse,or park to reverse with vehicle still in motion (rolling garage shift). Engine flare during 2-1 tip in downshift. Less than desired shift quality during 6-5 and 5-4 coasting downshifts. Delayed downshifts in Tow/Haul mode while driving down grades. Less than desired transmission shift performance when transitioning froma low traction to high traction surfaces i.e. ice covered road to clear pavement. Less than desired shift points during light pedal and Wide Open Throttle(WOT) operation or while in Tow/Haul and engine brake modes. 1-2 upshift shudder correction(Diesel engine and DF2 Transmission Only). A harsh 1-2 upshift(DF2 Transmission Only). Excessive gear shifting(DF2 Transmission Only). Harsh 2-1 downshift(DF2 Transmission Only). Delayed engagement when shifting from neutral to drive, neutral to reverse,or park to reverse (garage shifts)(DF2 Transmission Only). Audible squawk noise on 4-3 downshift(DF2 Transmission Only). Poor vehicle acceleration in first gear with vehicle fully loaded(DF2 Transmission Only). MIL illumination with no defect found forDTC P253D - PTO Sense Circuit High(DF2 Transmission Only).
18-073-212022-08-22. Service bulletin. Diesel Injector Freezing This bulletin involves installing a insulator over the Diesel Exhaust Fluid (DEF) injector. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P218F - Reductant No Flow Detected. P202E - (Diesel Exhaust Fluid) Reductant Injector Performance. The customer will not notice any drivability issues associated with these DTCs. These DTCs may set when the vehicles is parked for a long time and the ambient temperatures are below -11 °C (12 °F).
18-001-142022-08-22. Service bulletin. Flash: Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Code (DTC) has been set: ? P0456 - Evap System Small Leak In addition, the following software enhancements are available for D2, DJ, and DD vehicles equipped with a 5.7L engine (sales code EZC) ? Transmission torque management enhancement when shifting from drive to reverse. ? Additional powertrain enhancements to the intake manifold Short Runner Valve (SRV) system. ? Additional powertrain enhancements for block heater applications (sales code NHK).

A bulletin is the manufacturer's note to its dealers. It is not part of this recall.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.