Transport Canada recall 2010462
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2010462 |
| Manufacturer's number | 416 |
| Reported | 2010-12-23 |
| Component | Engine |
| Notification type | Safety Mfr |
| Units potentially affected | 11 |
What is wrong
On certain motorcycles, the engine oil filler plug/dipstick may be of an incorrect length. As a result, the accuracy of the dipstick may be compromised and adequate oil levels may not be maintained. Incorrect oil level may cause the engine to fail and seize. Lost propulsion, in conjunction with traffic and road conditions, and the rider's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the affected oil filler plug/dipstick.
| 2010 TRIUMPH SPRINT GT 1050 | Listed as a series or trim of this model. |
|---|---|
| 2010 TRIUMPH SPRINT ST 1050 | Listed as a series or trim of this model. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SMT-TB201-20DEC2 | 2020-01-21. Service bulletin. Technical Bulletin 200 provides instructions that apply to Steering Lock and Keys, Neutral Position Adaption, Triumph Diagnostic Tool - End of Support for Microsoft Windows 7®, Triumph Diagnostic Tool - Internet Connection and Minimum eEquipment Requirement, Torque Change, Clutch Cable, Camshaft Frame Installation, Immobiliser Antenna Wire Routing. |
|---|---|
| SMT-TN 159 1 Oct | 2017-11-03. Service bulletin. Technical service bulletin 159 addressing 19 service instructions, some of which apply to all models. Instructions relate to piston and piston top ring, alternator rotor retaining bolt, rear brake hose guide, auxiliary lights, headlight spares, gear selector drum and neutral light switch, pulser ring fixings, side stand fixing, battery terminal cover, heated grip fixings, headstock bearing adjustment, front and rear diretion indicator fixings, swinging arm, throttle linkage cleaning, headlight label, clutch lifter piece, rear brake caliper bleed nipple and owner's handbook. |
| SMT-TN 157 1 May | 2017-11-03. Service bulletin. Technical service bulletin 157 addressing 10 service instructions. Instructions relate to fork oil level, service manual amendment, torque change, seat infill panel locating lug fixings, harness, gear position sensor and harness/gear position sensor parts kit, torque change, M10 ABS hard line unions, front fork disassembly and assembly, new packing crate and footboard reassembly, main frame parts kit, torque change, clutch cover fixings, ABS front brake line. |
| SMT-TN 155 1 Feb | 2017-11-03. Service bulletin. Technical service bulletin 155 addressing 9 service instructions, some of which apply to all models. Instructions relate to the upper drive belt guard, catalytic converter mounting bracket, torque figures updates, horn fixing, centre stand fixings, front brake hose clip, clutch cover kits, breather cover fixings and audio systems. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.