Transport Canada recall 2010269
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2010269 |
| Manufacturer's number | R166 |
| Reported | 2010-08-11 |
| Component | Seats And Restraints |
| Notification type | Safety Mfr |
| Units potentially affected | 39 |
What is wrong
On certain vehicles, an improper wire insertion process during assembly resulted in an out-of-specification welding of the tether anchor wire to the seat gusset. The tether anchorage may not meet the strength requirements of the Canada Motor Vehicle Safety Standard 210.1 - User-ready Tether Anchorages for Restraint Systems. If a child restraint is installed using the top tether anchor in the front passenger seat, the tether anchor could separate in a crash, increasing the risk of personal injury. Correction: Dealers will replace the front passenger seat tether anchor with a new one.
| 2010 NISSAN FRONTIER |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| NTB15036 | 2021-05-10. Service bulletin. SERVICE INFORMATION The applied vehicles are equipped with automatic door locks that lock all doors when the vehicle speed reaches 15 MPH. There is no instruction in the Owner?s Manual on auto-lock function deactivation. All doors unlock automatically when the ignition is placed in the OFF position (models with Intelligent Key system) or when the key is removed from the ignition switch (models without Intelligent Key system). The auto-unlock function can be deactivated by the driver in accordance with Owner?s Manual Instructions. Please see this bulletin for further details. |
|---|---|
| NTB13038 | 2021-05-10. Service bulletin. SERVICE INFORMATION The "Lock / Unlock request buttons" that are located on the outside door handles of vehicles with Intelligent Key can be disabled (or enabled) through either the "Comfort & Conv." settings of the Audio/Visual/Navigation system, orthrough the "Combination Meter settings" depending on the vehicle model, year and trim level. NOTE: In some instances this feature may be unintentionally disabled. Please verify the status of this feature before any further diagnostic is performed. Please see this bulletin for further details. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.