Transport Canada recall 2008368
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2008368 |
| Manufacturer's number | SA078 |
| Reported | 2008-10-09 |
| Component | Lights And Instruments |
| Notification type | Safety Mfr |
| Units potentially affected | 348 |
What is wrong
Certain vehicles fail to comply with CMVSS 108 - Lighting System and Retroreflective Devices. The Daytime Running Lamps (DRL) are combined with the turn signal lamps in a way that, when the turn signal is switched ON, both DRL lamps are extinguished. This manner of operation is contrary to the requirements of the Standard. Correction: Dealers will install updated software.
| 2009 KIA BORREGO |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| TSB_BOD055_R1 | 2021-10-02. Service bulletin. TECHNICAL SERVICE BULLETIN: INFORMATION FOR HEADLAMP CONDENSATION AND MOISTURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to some Kia models that may exhibit fogging, condensation, and/or moisture inside a headlamp assembly. Generally, a fogging condition is considered normal and can be eliminated by turning on the headlamps with the engine running for up to 30 minutes or during normal driving conditions. Headlamp assembly replacement WILL NOT be necessary in most cases. |
|---|---|
| PS382 | 2017-02-17. Service bulletin. PITSTOP: STOP LAMP SWITCH IDENTIFICATION MATRIX (SC098) - KMA HAS RECEIVED A NUMBER OF INCORRECT WARRANTY RETURN PARTS RELATED TO CAMPAIGN SC098 AND HAS DETERMINED THAT AT TIMES DEALER STAFF MAY HAVE DIFFICULTY IN QUICKLY AND EASILY IDENTIFYING THE CORRECT SWITCHES WHILE ORDERING PARTS, PREPARING TO PERFORM THE STOP LAMP REPLACEMENT OR WHILE PREPARING TO RETURN REPLACED SWITCHES TO KMA (IN CASE OF AN EXISTING MANDATORY PART RETURN (MPR) REQUEST). TO FACILITATE FASTER AND EASIER IDENTIFICATION OF THE CORRECT PARTS, A PICTURE GUIDE AS SHOWN ON PAGE 2 IS PROVIDED. THE GUIDE’S CONTENT WAS PURPOSELY FORMATTED TO FIT ON ONE PAGE SO IT CAN BE EASILY PRINTED AND KEPT ON OR NEAR A WORKSTATION, PARTS COUNTER OR TOOL BOX. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.