Transport Canada recall 2005397
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2005397 |
| Manufacturer's number | 05525 |
| Reported | 2005-12-19 |
| Component | Brakes |
| Notification type | Compliance Mfr |
| Units potentially affected | 166 |
What is wrong
Certain vehicles fail to comply with the requirements of CMVSS 121 - Brake Actuation Timing. The air brake component size and configuration are inadequate for these extended wheelbase vehicles, causing the mid-rear and rear-rear axle brakes to take longer than required to apply. The longer brake apply time may result in extended stopping distances. Correction: Dealers will affect repairs.
| 2002 INTERNATIONAL 5600I 8X6 | Listed as a series or trim of this model. |
|---|---|
| 2003 INTERNATIONAL 5600I 8X6 | Listed as a series or trim of this model. |
| 2004 INTERNATIONAL 5600I 8X6 | Listed as a series or trim of this model. |
| 2005 INTERNATIONAL 5600I 8X6 | Listed as a series or trim of this model. |
| 2006 INTERNATIONAL 5600I 8X6 | Listed as a series or trim of this model. |
| 2002 INTERNATIONAL 5900I 8X6 | Listed as a series or trim of this model. |
| 2003 INTERNATIONAL 5900I 8X6 | Listed as a series or trim of this model. |
| 2004 INTERNATIONAL 5900I 8X6 | Listed as a series or trim of this model. |
| 2005 INTERNATIONAL 5900I 8X6 | Listed as a series or trim of this model. |
| 2006 INTERNATIONAL 5900I 8X6 | Listed as a series or trim of this model. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| IK0400040 | 2023-10-05. Service bulletin. General Wheel Speed Sensor Troubleshooting |
|---|---|
| IK0400040 | 2021-08-04. Service bulletin. General wheel speed sensor troubleshooting |
| IK0400159 | 2020-02-04. Service bulletin. Bendix EC80 Blank Module Replacement Program; This document will guide the user through selecting the correct ABS module when it has been determined a replacement is needed. Only Models with EC-80 ABS Controller |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.