Transport Canada recall 2005166
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2005166 |
| Manufacturer's number | 05513 |
| Reported | 2005-05-31 |
| Component | Brakes |
| Notification type | Safety Mfr |
| Units potentially affected | 262 |
What is wrong
On certain vehicles, the push rod that connects the brake pedal to the brake valve was manufactured incorrectly and may break under certain loading conditions. If this push rod breaks while the vehicle is in operation, a significant loss of service braking may be experienced. This could result in a vehicle crash without warning, possibly resulting in property damage, personal injury or death. Correction: Dealers will replace the brake pedal push rod.
| 2006 INTERNATIONAL 4200 4X2 | Listed as a series or trim of this model. |
|---|---|
| 2006 INTERNATIONAL 4300 4X2 | Listed as a series or trim of this model. |
| 2006 INTERNATIONAL 4400 4X2 | |
| 2006 INTERNATIONAL 7300 4X2 | Listed as a series or trim of this model. |
| 2006 INTERNATIONAL 7400 4X2 | Listed as a series or trim of this model. |
| 2006 INTERNATIONAL 7400 4X4 | Listed as a series or trim of this model. |
| 2006 INTERNATIONAL 7400 6X4 | Listed as a series or trim of this model. |
| 2006 INTERNATIONAL 7500 4X2 | Listed as a series or trim of this model. |
| 2006 INTERNATIONAL 7500 4X4 | Listed as a series or trim of this model. |
| 2006 INTERNATIONAL 7500 6X4 | Listed as a series or trim of this model. |
| 2006 INTERNATIONAL 7600 6X4 | Listed as a series or trim of this model. |
| 2006 INTERNATIONAL 7700 6X4 | |
| 2006 INTERNATIONAL 8500 4X2 | |
| 2006 INTERNATIONAL 8500 6X4 | |
| 2006 INTERNATIONAL 8600 4X2 | Listed as a series or trim of this model. |
| 2006 INTERNATIONAL 8600 6X4 | Listed as a series or trim of this model. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| IK0400040 | 2023-10-05. Service bulletin. General Wheel Speed Sensor Troubleshooting |
|---|---|
| IK0400046 | 2021-12-07. Service bulletin. WABCO Full Power Brake Diagnostic Code (DTC) Index |
| IK0400028 | 2021-11-03. Service bulletin. How to program parameters after changing WABCO FPB ECU (Parking brake shows N/A) |
| IK0400040 | 2021-08-04. Service bulletin. General wheel speed sensor troubleshooting |
| IK0400159 | 2020-02-04. Service bulletin. Bendix EC80 Blank Module Replacement Program; This document will guide the user through selecting the correct ABS module when it has been determined a replacement is needed. Only Models with EC-80 ABS Controller |
| IK0400014 | 2019-10-21. Service bulletin. Converting 4000 4 X 2 HPV Models with Hydraulic ABS Brakes to 4 X 4 Configuration may Increase Stopping Distance and is Not Approved by International Truck and Engine Corporation and Merritor Wabco |
| IK0400019 | 2019-10-03. Service bulletin. Air Powered (SAAR) Park Brake Troubleshooting (Service "P" Light Coming on). Only models with hydraulic brakes |
| AFC-08901 | 2010-06-14. Service bulletin. NAVISTAR: HYDRAULIC FULL POWER BRAKE SYSTEM POWER SUPPLY. INSTALLING AN ADDITIONAL WIRING HARNESS FROM THE POSITIVE POST OF THE ALTERNATOR TO THE FULL POWER BRAKE WIRING HARNESS FOR THE PURPOSE OF SUPPLYING REDUNDANT ELECTRICAL POWER TO THE FULL POWER BRAKE SYSTEM. *PE |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.