Transport Canada recall 2001297
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2001297 |
| Manufacturer's number | 0502A |
| Reported | 2001-12-21 |
| Component | Brakes |
| Notification type | Safety Mfr |
| Units potentially affected | 12990 |
What is wrong
Due to inappropriate brake pipe layout certain vehicles fail to meet the required partial failure stopping distance required by C.M.V.S.S. 135. Correction: Dealers will replace the proportioning valve, brake pipes, and hardware.
| 2000 MAZDA MPV | |
|---|---|
| 2001 MAZDA MPV |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SA-011-24 | 2024-03-06. Service bulletin. Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers. |
|---|---|
| 00-001-22 | 2022-03-04. Service bulletin. Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers. |
| 00-001-20-3689 | 2020-04-03. Service bulletin. Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers. |
| 00-002-19-3561 | 2019-02-19. Service bulletin. Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor. IMPORTANT: Rotors must be machined using a Mazda approved on-car brake lathe, or warranty claims are subject to denial or debit. Tool Number Description Pricing PC1923MAZ Pro-Cut On-Car Brake Lathe Check eStore or call for current pricing OBTAINING TOOLS This tool can be ordered through Mazda eStore. You can log on to eStore at: http://dealers.mazdausa.com CUSTOMER SERVICE INFORMATION For warranty or product information contact Mazda Authorized Service Equipment at 877-768-6657. Customer service representatives are available from 7:30 AM until 7:00 PM CST, Monday through Friday. SPECIAL SERVICE TOOL (SST) PART NAME: OVERVIEW Pro-Cut On-Car Brake Lathe PART NUMBER: PC1923MAZ APPLICABLE MODELS: All USAGE: To machine brake rotors on the vehicle. |
| 00-003-18-3480a | 2018-11-13. Service bulletin. Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor. IMPORTANT: Rotors must be machined using a Mazda approved on-car brake lathe, or warranty claims are subject to denial or debit. |
| 00-003-18-3480 | 2018-07-02. Service bulletin. Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor. IMPORTANT: Rotors must be machined using a Mazda approved on-car brake lathe, or warranty claimsare subject to denial or debit. |
| 0400103 | 2003-10-18. Service bulletin. FRONT BRAKE CLUNKING NOISE. *TT |
| 0400202 | 2002-10-01. Service bulletin. SUBJECT REGARDING BRAKE JUDDER DUE TO RUST ON FRONT DISC PLATE. *SLC |
| 0400102 | 2002-09-28. Service bulletin. SUBJECT REGARDING FRONT BRAKE CLUNKING NOISE. *SLC |
| 0400101R | 2001-09-04. Service bulletin. CERTAIN MODELS WITH VINS LOWER THAN JM3LW28** 10 170417 MAY EXHIBIT A METALLIC POPPING, CLICKING OR SQUEALING SOUND COMG FROMTHE REAR BRAKES. THIS MAY OCCUR WHILE APPLYING THE BRAKES UNDER NORMAL STOPPING CONDITIONS. *TT |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.