Transport Canada recall 2001155
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2001155 |
| Manufacturer's number | 890 |
| Reported | 2001-06-20 |
| Component | Powertrain |
| Notification type | Safety Mfr |
| Units potentially affected | 2553 |
What is wrong
Certain pickup trucks equipped with 4.7L engine and automatic transmissions. The automatic transmission may expel fluid from the fill tube during normal temperature operation. The transmission fluid could come into contact with the hot exhaust system and ignition of the transmission fluid could result. Correction: Dealers will shorten the vent hose and assure adequate clearance.
| 2000 DODGE DAKOTA |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 05191925A$ | 2020-10-26. Service bulletin. Radiator If vehicle comes in for transmission fluid leaking from trans-oil cooler fittings on the radiator, please perform the following before replacing the radiator/cooler:~ 1. Remove both of the transmission lines from the cooler?s top/bottom flared fittings on the radiator. ~ 2. Remove hex nut and the top flared fitting on the radiator tank.~ 3. Using a wire brush and gasket remover, clean off the old sealant on the smaller threaded portion of the flared fitting. Do the same for the threads on the trans oil cooler.~ 4. Apply a new application of Mopar PN 04318032 to the flared fitting, leaving the first threads free for ease of engagement.~ 5. Install the top flared fitting by hand, then torque the fitting to 235 +/- 15 Lb-In.~ 6. Install the hex nut and torque to 100 +/- 10 Lb-In.~ 7. Repeat steps 2-6 for bottom flared fitting.~ 8. Reinstall transmission line per normal installation procedures and ensure correct fluid level.~ |
|---|---|
| 9002901 | 2018-05-21. Service bulletin. Part Description: Seal - Shift Shaft on RFE transmissions Issue Description: This seal (04799346) is replaceable with Seal Kit (68235551AA), which includes a seal and retainer. The Seal Kit is applicable to all (5)45RFE transmissions. |
| 2101505 | 2005-10-20. Service bulletin. 45RFE/545RFE TRANS - DELAYED ENGAGEMENT DUE TO COOLER RETURN FILTER REPLACEMENT. *SC |
| 2100202 | 2002-10-30. Service bulletin. SUBJECT REGARDING REVISION IN DIAGNOSTIC PROCEDURES AND LABOR OPERATION TIMES FOR RE TRANSMISSIONS. *TT |
| 1802501 | 2002-03-06. Service bulletin. SOME VEHICLES MAY EXHIBIT A HARSH 2-3, 4-5, AND 5-4 UPSHIFTS CAUSING A POWERTRAIN CLUNK OR SHUDDER WHEN ACCELERATING. *TT |
| 2100601 | 2001-10-03. Service bulletin. AUTOMATIC TRANSMISSION FLUID USAGE ATF+4. *TT *MJ |
| 1300200 | 2001-05-03. Service bulletin. INFORMATION PERTAINING TO TRANSMISSION CROSSMEMBER SERVICE. *TT |
| 210900 | 2000-11-30. Service bulletin. SUBJECT REGARDING 45RFE TRANSMISSION QUALITY ENHANCEMENTS FOR THE 1-2, 2-3, AND 4-3 SHIFTS. *TT |
| 889 | 2000-11-30. Service bulletin. CUSTOMER SATISFACTION NOTIFICATION REGARDING FRONT AXLE PINION NOSE BRACKET BOLT REPLACEMENT. *TT |
| 849 | 2000-04-14. Service bulletin. SUBJECT REGARDING TRANSMISSION CROSSMEMBER SUPPORT BRACKETS. *TT |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.