NHTSA recall 90V072000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 90V072000 |
| Manufacturer | NISSAN NORTH AMERICA, INC. |
| Reported | 1990-04-17 |
| Owners notified | 1990-06-25 |
| Component | EQUIPMENT:OTHER:LABELS |
| Units potentially affected | 750000 |
What is wrong
INCORRECT TIRE INFLATION PRESSURES WERE PRINTED ON CERTIFICATION LABELS.
What can happen
INCORRECT TIRE INFLATION COULD RESULT IN LOSS OF VEHICLE CONTROL AND AN ACCIDENT.
The remedy
INSTALL CORRECTED TIRE INFORMATION LABEL ON DOORPOST CERTIFICATION LABEL.
Notes
SYSTEM: TIRE INFORMATION LABEL; FMVSS 120.VEHICLE DESCRIPTION: LIGHT TRUCKS, MULTIPURPOSE PASSENGER VEHICLE, AND PASSENGER CARS.
| 1983 NISSAN 720 | Built 1983-06-01 to 1988-09-01. |
|---|---|
| 1984 NISSAN 720 | Built 1983-06-01 to 1988-09-01. |
| 1985 NISSAN 720 | Built 1983-06-01 to 1988-09-01. |
| 1986 NISSAN 720 | Built 1983-06-01 to 1988-09-01. |
| 1986 NISSAN D21 | Built 1983-06-01 to 1988-09-01. |
| 1987 NISSAN D21 | Built 1983-06-01 to 1988-09-01. |
| 1988 NISSAN D21 | Built 1983-06-01 to 1988-09-01. |
| 1989 NISSAN D21 | Built 1983-06-01 to 1988-09-01. |
| 1990 NISSAN D21 | Built 1983-06-01 to 1988-09-01. |
| 1987 NISSAN PATHFINDER | Built 1983-06-01 to 1988-09-01. |
| 1988 NISSAN PATHFINDER | Built 1983-06-01 to 1988-09-01. |
| 1989 NISSAN PATHFINDER | Built 1983-06-01 to 1988-09-01. |
| 1990 NISSAN PATHFINDER | Built 1983-06-01 to 1988-09-01. |
| 1986 NISSAN STANZA | Built 1983-06-01 to 1988-09-01. |
| 1987 NISSAN STANZA | Built 1983-06-01 to 1988-09-01. |
| 1988 NISSAN STANZA | Built 1983-06-01 to 1988-09-01. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| NTB-09-129 | 2010-04-07. Service bulletin. NISSAN: VENT CONTROL VALVE REPLACEMENT. WHEN REPLACING THE EVAP CANISTER VENT CONTROL VALVE FOR REASON: USE THE ONE LISTED ON PAGE 2; FOR VENT CONTROL VALVE REPLACEMENT PROCEDURE, REFER TO THE APPROPRIATE SECTION OF THE ELECTRONIC SERVICE MANUALS (ESM; WHEN INSTALLING THE NEW VALVE, DO NOT ADD ANY LUBE TO ITS O RING; FOR FRONTIER (D40 SERIES) ONLY, INSTALL THE PROTECTOR LISTED IN PARTS INFORMATION. *PE INCLUDES 2005-09 FRONTIER. UPDATED 12/8/10. *PE |
|---|
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.