NHTSA recall 26V325000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 26V325000 |
| Manufacturer's number | N262557310 |
| Manufacturer | General Motors, LLC |
| Reported | 2026-05-21 |
| Owners notified | 2026-06-24 |
| Component | AIR BAGS |
| Units potentially affected | 4315 |
| Part numbers | 84487867, 84487868 |
| Report | Quarterly report 1, for 2026 quarter 2 |
|---|---|
| Filed with NHTSA | 2026-07-21 |
| Vehicles in the campaign | 2785 |
| Reported remedied | 112 (4%) |
| Reported unreachable | 0 |
| Reported removed | 0 |
These are the manufacturer's totals for the whole campaign at the end of 2026 quarter 2, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
General Motors, LLC (GM) is recalling certain 2018 Chevrolet Silverado 1500, GMC Sierra 1500, 2019 Chevrolet Silverado 2500, Silverado 3500, GMC Sierra 2500, and Sierra 3500 vehicles. The left-side or right-side roof rail air bag (RRAB) inflator end cap may detach from the inflator or the inflator sidewall may rupture.
What can happen
A detached end cap or inflator rupture can allow compressed gas to escape and project the end cap or fragments of the inflator into the vehicle, increasing the risk of injury.
The remedy
Dealers will replace both RRAB modules, free of charge. Owner notification letters were mailed June 24, 2026. Owners may contact GMC customer service at 1-888-988-7267 or Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N262557310. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on May 21, 2026. This recall expands previous NHTSA recall number 26V166.
| 2018 CHEVROLET SILVERADO 1500 | Built 2017-11-11 to 2018-10-24. Listed as a series or trim of this model. |
|---|---|
| 2019 CHEVROLET SILVERADO 2500 | Built 2018-10-08 to 2018-10-23. Listed as a series or trim of this model. |
| 2019 CHEVROLET SILVERADO 3500 | Built 2018-10-08 to 2018-10-23. Listed as a series or trim of this model. |
| 2018 GMC SIERRA 1500 | Built 2017-11-11 to 2018-10-24. Listed as a series or trim of this model. |
| 2019 GMC SIERRA 2500 | Built 2018-10-08 to 2018-10-23. Listed as a series or trim of this model. |
| 2019 GMC SIERRA 3500 | Built 2018-10-08 to 2018-10-23. Listed as a series or trim of this model. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 25-NA-019 | 2025-02-11. Service bulletin. This bulletin advises the tech to check other areas that may need repair before replacing the wheel speed sensor. |
|---|---|
| PIT5636D | 2023-12-04. Service bulletin. This Preliminary information communicates an issues with a SES MIL and DTC P1005 and to replace the fuel pump driver control module with an updated part number. |
| PIT5509K | 2023-06-13. Service bulletin. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicle that may have a "Check Trailer Wiring" or "Service Trailer Brake System? message on the Driver Information Center when a trailer is connected to the vehicle. Diagnostic Trouble Code C1114 set in the Chassis Control Module. Chassis Control Module has to determine the type of trailer brake system that is being used. The Chassis Control Module can be sensitive to a variety of trailer wiring issues. The technician will need to make a trailer tester using Electric Trailer Brake Magnets and 7-way trailer connector to determine if it is a vehicle or trailer issue. If the concern is not duplicated with the tester installed, the vehicle is operating correctly and the focus should be on the trailer wiring or 7 way connector. |
| PIT4322N | 2023-03-13. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed. |
| PIT5391F | 2023-03-13. Service bulletin. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that have a no crank or a start and then immediate stall, Service Engine Soon Malfunction Indicator lamp may not be on when the ignition is in the run position. Technician may find Diagnostic Trouble Codes P0513 and or P262B may also be set. Technician will pulled the driver sill plate and inspect the wiring for damaged or corroded circuits. Technician will repair any damaged or corroded circuits. |
| PIP5705 | 2022-07-25. Service bulletin. This Preliminary information communicates A vehicle may have a concern of a vibration or drone around 40 MPH and 1200 RPM under a light load. Debris in the tranmission mount. Inspect the transmission mount for debris. If debris is found, clean the mount, reinstall and evaluate for the concern. |
| 16NA361 | 2022-05-31. Service bulletin. This service bulletin provides service /diagnostic information to aid with a Transmission Harsh 1-2 Shift Upon First Start Up/Shift of the Day Under Light Throttle. |
| PIT5747B | 2022-03-14. Service bulletin. This Preliminary information communicates to dealership how to test properly trailer light option on the truck and also provide additional information on trailer issues. |
| N182201853 | 2022-02-14. Service bulletin. Service Update. In certain vehicles, the customer may witness a service engine soon light and the vehicle?s dynamic fuel management (DFM) may become inactive and stay in V8 operating mode. Reprogram the Engine Control Module (ECM). |
| N182188440 | 2022-02-14. Service bulletin. Customer Satisfaction Program. Certain vehicles may have an incomplete or missing braze between the harness bulkhead support bracket and the fuel rail assembly. If the braze is incomplete the support bracket may detach from the fuel rail assembly over time. Wiring may sever and compromise the function of the fuel pump and/or the 4 passenger side injectors. If the function of the fuel pump and/or injectors is compromised, the Check Engine Light will come on, and you could experience reduced engine power. Loss of propulsion is possible, and there is a remote chance of fire if there is a fuel leak. Replace fuel rail assembly. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.