WenmarOpen by Wenmar Pro

NHTSA recall 25V401000

NHTSA advises: do not drive until the repair is done.

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

Campaign
Published byNHTSA (United States)
Campaign number25V401000
Manufacturer's number25C26
ManufacturerFord Motor Company
Reported2025-06-13
Owners notified2025-06-19
ComponentSERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES
Units potentially affected2345
Part numbersBC34-2B129-A, YC15-3757-A, 380699-S100, C9OA-2A309-A
Remedy progress the manufacturer reported
ReportQuarterly report 5, for 2026 quarter 2
Filed with NHTSA2026-07-21
Vehicles in the campaign2345
Reported remedied2017 (86%)
Reported unreachable5
Reported removed0

These are the manufacturer's totals for the whole campaign at the end of 2026 quarter 2, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.

What is wrong

Ford Motor Company (Ford) is recalling certain 2025 F-550 SD, F-450 SD, F-350 SD, and F-250 SD vehicles. The brake booster pushrod retaining spring may not have been installed, which can allow the pushrod to disconnect from the brake pedal and cause a sudden loss of brake function. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 135, "Light Vehicle Brake Systems" and 105, "Hydraulic and electric brake systems."

What can happen

A sudden loss of brake function increases the risk of a crash.

The remedy

Owners are advised not to drive their vehicles until they have been repaired. Dealers will inspect and repair the brake pedal assembly as necessary, free of charge. Owner notification letters were mailed June 20, 2025. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 25C26.

Vehicles this campaign lists
2025 FORD F-250 SDBuilt 2025-03-19 to 2025-05-04. Listed as a series or trim of this model.
2025 FORD F-350 SDBuilt 2025-03-19 to 2025-05-04. Listed as a series or trim of this model.
2025 FORD F-450 SDBuilt 2025-03-19 to 2025-05-04. Listed as a series or trim of this model.
2025 FORD F-550 SDBuilt 2025-03-19 to 2025-05-04. Listed as a series or trim of this model.

A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.

Bulletins for the same vehicles and component

Bulletins for the same vehicles and component
SSM 552392026-10-13. Service bulletin. Some 2023-2026 F-Super Duty vehicles equipped with a trailer brake control module and built on or before 08-May-2026 may exhibit a "Trailer Disconnected" message after cycling the ignition off and back on with a trailer connected. This may be due to the presence of an integrated battery charger on a trailer equipped with electric over hydraulic brakes. If trailer functionality is restored after unplugging and plugging the trailer connector back in while the ignition is on, this condition can be corrected by downloading and performing the "Trailer Brake Configuration" application using the latest software version of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 19H332 and labor operations 12651D and 12651D4. Workshop Manual (WSM), Section 417-01 Exterior Lighting > Diagnosis and Testing > Trailer Lamps > Pinpoint Test G The Message Center Displays A False Trailer Disconnected Message When A Trailer Is Connected To The Vehicle - Only For Electric Over Hydraulic (EOH) Equipped Trailers When Vehicle Trailer Brake Type Setting Is Set To Electric Over Hydraulic has bee
SSM 547222026-04-10. Service bulletin. Some 2023-2026 F-Super Duty vehicles equipped with a trailer brake control module may exhibit a "Trailer Disconnected" message after cycling the ignition off and back on with a trailer connected. This may be due to the presence of an integrated battery charger on a trailer equipped with electric over hydraulic brakes. If trailer functionality is restored after unplugging and plugging the trailer connector back in while the ignition is on, this condition can be corrected by downloading and performing the "Trailer Brake Configuration" application using the latest software version of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 19H332 and labor operations 12651D and 12651D4. Workshop Manual (WSM), Section 417-01 Exterior Lighting > Diagnosis and Testing > Trailer Lamps > Pinpoint Test G has been updated to improve diagnostics for this condition.
SSM 544482026-01-06. Service bulletin. Some 2017-2026 F-Super Duty vehicles may exhibit a pull/drift condition during braking. This may be due to the brake pads needing to be broken in. Repeated, heavy brake applications may assist to resolve the pull/drift condition. The Workshop Manual, Section 206-00 Symptom Chart for vehicle pulls or drifts during braking has been updated to reflect this information.
SSM 544202025-12-10. Service bulletin. Some 2023-2026 F-Super Duty vehicles built on or before 01-Oct-2025 may exhibit a "Hill Start Assist Unavailable" and/or "Parking Brake Limited Function" message at vehicle start-up with diagnostic trouble codes (DTCs) U0151, U023A, U0159 and/or U0146 stored in the anti-lock brake system (ABS) module. These DTCs and/or U0415 may also be present in various other modules related to "invalid data received from the ABS control module". This may be due to the software in the ABS module. To correct the condition, reprogram the ABS module using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 2C219 and labor operations 2219D and 2219D44.
SSM 543332025-11-04. Service bulletin. Some 2023-2025 F-Super Duty vehicles may exhibit a no crank/no start or intermittent no crank/no start with multiple warning indicators and DTC U0100 stored in the anti-lock brake system (ABS), audio front control module (ACM) and power steering control module (PSCM). This may be due to an incorrectly tightened ground 113 (G113). Inspect G113 for proper connection and tighten to 12 Nm (8.9 ft-lb). If the condition remains after tightening G113, perform normal diagnostics outside of this article. Refer to Workshop Manual, Section 303-06 Starting System. For claiming, use causal part 12A581 and labor operations 12650D and 12650D45WR of the Service Labor Time Standards (SLTS) Manual.
SSM 542502025-10-02. Service bulletin. Some 2024-2025 Escape Hybrid/Maverick Hybrid/Nautilus Hybrid/F-150 non-Lightning/F-Super Duty/Bronco and 2025 Expedition/Navigator/Ranger vehicles where customers have installed an aftermarket supplemental braking system may experience a discharged 12-volt battery after recreational towing. This may be due to the supplemental braking system keeping the vehicle awake during brake applications. Advise customers that while recreational towing the vehicle with a supplemental braking system installed, it is recommended to use a 12-volt battery charger connected to a power source external to the vehicle being towed. The Owners Manual is in process of being updated with this information.
SSM 541602025-08-26. Service bulletin. Some 2023-2025 F-Super Duty vehicles may exhibit a "Hill Start Assist Unavailable" and/or "Parking Brake Limited Function" message at vehicle start-up with diagnostic trouble codes (DTCs) U0151, U023A, U0159, and/or U0146 stored in the anti-lock brake system (ABS) module. These DTCs and/or U0415 may also be present in various other modules related to "invalid data received from the ABS control module". This may be due to the software in the ABS module. To correct the condition, reprogram the ABS module using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 2C219 and labor operation 2219D and 2219D44.
SSM 538922025-06-19. Service bulletin. Some 2023-2025 F-Super Duty vehicles may exhibit a "Hill Start Assist Unavailable" and/or "Parking Brake Limited Function" message at vehicle start-up with diagnostic trouble codes (DTC) U0151, U023A, U0159, and/or U0146 stored in the anti-lock brake system (ABS) module. These DTCs and/or U0415 may also be present in various other modules related to "invalid data received from the ABS control module". Replacement or reprogramming of the ABS module will not resolve this condition. There is no effect to the parking brake or other vehicle functions. This does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in Q3 2025. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available.
SSM 538892025-06-19. Service bulletin. Some 2023-2025 F-Super Duty vehicles equipped with a trailer brake control module may exhibit a "Trailer Disconnected" message after cycling the ignition off and back on with a trailer connected. This may be due to the presence of an integrated battery charger on a trailer equipped with electric over hydraulic brakes. If trailer functionality is restored after unplugging and plugging the trailer connector back in while the ignition is on, this condition can be corrected by downloading and performing the "Trailer Brake Configuration" application using the latest version of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 19H332 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
SSM 532392025-01-02. Service bulletin. Some 2023-2025 F-Super Duty vehicles may require a replacement of the anti-lock brake system (ABS) module (2C219) during normal workshop manual (WSM) diagnostics.

A bulletin is the manufacturer's note to its dealers. It is not part of this recall.

Check one vehicle officially