NHTSA recall 24V879000

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

Campaign
Published by	NHTSA (United States)
Campaign number	24V879000
Manufacturer's number	271
Manufacturer	Hyundai Motor America
Reported	2024-11-21
Owners notified	2025-01-14
Component	BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Units potentially affected	226118
Part numbers	99240-S1500, 99240-AA200

Remedy progress the manufacturer reported
Report	Quarterly report 6, for 2026 quarter 2
Filed with NHTSA	2026-07-24
Vehicles in the campaign	226118
Reported remedied	140984 (62%)
Reported unreachable	3411
Reported removed	18103

These are the manufacturer's totals for the whole campaign at the end of 2026 quarter 2, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.

What is wrong

Hyundai Motor America (Hyundai) is recalling certain 2021-2022 Santa Fe, Santa Fe HEV, Elantra, Elantra HEV and 2022 Elantra N and Santa Fe PHEV vehicles. Due to a damaged printed circuit board, the rearview camera image may fail to display. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

What can happen

A rearview image that does not display reduces the driver's visibility and increases the risk of a crash.

The remedy

Dealers will replace the rearview camera, free of charge. Owner notification letters were mailed January 14, 2025. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 271.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to nhtsa.gov.

Vehicles this campaign lists
2021 HYUNDAI ELANTRA	Built 2020-09-12 to 2022-05-16.
2022 HYUNDAI ELANTRA	Built 2020-09-12 to 2022-05-16.
2021 HYUNDAI ELANTRA HYBRID	Built 2020-12-23 to 2022-02-14. Listed as a series or trim of this model.
2022 HYUNDAI ELANTRA HYBRID	Built 2020-12-23 to 2022-02-14. Listed as a series or trim of this model.
2022 HYUNDAI ELANTRA N	Built 2021-09-15 to 2022-02-07.
2021 HYUNDAI SANTA FE	Built 2024-11-01 to 2024-11-20.
2022 HYUNDAI SANTA FE	Built 2024-11-01 to 2024-11-20.
2021 HYUNDAI SANTA FE HYBRID	Listed as a series or trim of this model.
2022 HYUNDAI SANTA FE HYBRID	Listed as a series or trim of this model.
2022 HYUNDAI SANTA FE PLUG-IN HYBRID	Listed as a series or trim of this model.

A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.

Bulletins for the same vehicles and component

Bulletins for the same vehicles and component
22-01-038H	2022-05-10. Service bulletin. Some 2022 Elantra (CN7) vehicles may exhibit one or both of the following conditions: • When driving and the vehicle blind spot collision warning alert sound is on; upon reduction of speed below 10 mph, the warning sound does not turn off. • When backing up/moving in reverse and the rear cross traffic collision audible warning sound is on; upon changing the transmission into Drive, the warning sound does not turn off. This bulletin provides the service procedure to update the left and right BCA (Blind-Spot Collision-Avoidance Assist) modules software to resolve the condition(s) stated above.
20-BE-011H	2020-11-06. Service bulletin. Some 2020-2021 Santa Fe (TMa) and Palisade (LX2) may intermittently experience abnormal camera image display conditions on the instrument cluster when the turn signal is turned ON or the radio screen when transmission is in Reverse. The following conditions may occur; blurry image, line on the screen, fuzziness, or blue screen. This bulletin provides information to assist with troubleshooting the condition(s) above.

A bulletin is the manufacturer's note to its dealers. It is not part of this recall.