NHTSA recall 23V800000
NHTSA advises: do not drive until the repair is done.
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 23V800000 |
| Manufacturer's number | 23S61 |
| Manufacturer | Ford Motor Company |
| Reported | 2023-11-28 |
| Owners notified | 2023-12-21 |
| Component | SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES |
| Units potentially affected | 66 |
| Part numbers | PR3C-2450-DD, PR3C-2D094-AA, PR3C-2D094-BC |
| Report | Quarterly report 8, for 2025 quarter 3 |
|---|---|
| Filed with NHTSA | 2025-10-28 |
| Vehicles in the campaign | 66 |
| Reported remedied | 58 (87%) |
| Reported unreachable | 0 |
| Reported removed | 0 |
These are the manufacturer's totals for the whole campaign at the end of 2025 quarter 3, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Ford Motor Company (Ford) is recalling certain 2024 Mustang vehicles. The brake pedal assembly may have been manufactured incorrectly, which can result in a loose brake pedal.
What can happen
A loose brake pedal can result in a loss of braking function, increasing the risk of a crash.
The remedy
Owners are advised not to drive their vehicle until the repair has been performed. Dealers will replace the brake pedal and bracket assembly, free of charge. Owner notification letters were mailed December 21, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S61.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
| 2024 FORD MUSTANG |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SSM 52589 | 2024-06-10. Service bulletin. Some 2024 Mustang vehicles built on or before 10-Feb-2024 may set diagnostic trouble code (DTC) U211B:87 in the ABS module during a diagnostic self-test. This may be due to the modules DTC sensitivity during vehicle key-on/start-up. Replacement or reprogramming of the ABS module may not resolve this condition. U211B:87 should be ignored if no other DTCs are present, no warning indicators are illuminated while the engine is running, and no noticeable symptoms are present. No further service action is required. |
|---|---|
| SSM 52286 | 2024-03-05. Service bulletin. Some 2024 Mustang vehicles built on and before 08-Feb-2024 may exhibit an intermittent no crank/no start condition with various loss of communication diagnostic trouble codes (DTCs) stored in various modules and multiple illuminated warning indicators such as: anti-lock brake system (ABS) warning indicator, parking brake (red) indicator, brake warning indicator, parking brake (yellow) warning indicator and/or parking brake (red) indicator and/or stability-traction control indicator displayed in the instrumental panel cluster (IPC). To correct the condition, reprogram the ABS module using the latest software level of the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool. For claiming, use the causal part number 2005 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual. |
| SSM 52242 | 2024-02-14. Service bulletin. Some 2024 Mustang vehicles may set diagnostic trouble code (DTC) U211B:87 in the ABS module during a diagnostic self-test. This may be due to the ABS module's DTC sensitivity during vehicle key-on/start-up. To correct the condition, reprogram the ABS module using the latest software level of the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool. For claiming, use the causal part number 2005 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual. |
| SSM 52002 | 2023-11-03. Service bulletin. Some 2024 Mustang vehicles built on or before 30-June-2023 may exhibit a Low Brake Fluid message displayed on the instrument panel cluster (IPC) without low brake fluid in the reservoir and DTC C0049:0A stored in the anti-lock brake system (ABS) module. This may be due to the current software of the ABS module. To correct the condition, reprogram the ABS module using the latest software level of the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool. For claiming use the causal part number 2005 and applicable labor operations in Section 02 of the Service Labor Time Standards (SLTS) Manual. |
| SSM 51992 | 2023-11-03. Service bulletin. Some 2024 Mustang vehicles may exhibit a diagnostic trouble code (DTC) C1018 stored in the anti-lock brake system (ABS) module with no symptoms present. DTC C1018 should be ignored and no further service action is required. Replacement or reprogramming of the ABS module will not address this DTC. |
| SSM 51884 | 2023-09-03. Service bulletin. Some 2024 Mustang vehicles may set diagnostic trouble code (DTC) U211B:87 in the ABS module during a diagnostic self-test. This may be due to the modules DTC sensitivity during vehicle key-on/start-up. Replacement or reprogramming of the ABS module may not resolve this condition. U211B:87 should be ignored if: no other DTCs are present, no warning indicators are illuminated while the engine is running, and no noticeable symptoms are present. No further service action is required. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.