NHTSA recall 23V526000
NHTSA advises: park outside, away from buildings, until the repair is done.
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 23V526000 |
| Manufacturer's number | 246 |
| Manufacturer | Hyundai Motor America |
| Reported | 2023-07-27 |
| Owners notified | 2023-09-07 |
| Component | POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:PUMP |
| Units potentially affected | 52109 |
| Part numbers | 48110-2H100, 46110-4G530, 46110-2F630 |
| Report | Annual report 1, for 2025 quarter 3 to 2026 quarter 2 |
|---|---|
| Filed with NHTSA | 2026-07-23 |
| Vehicles in the campaign | 52109 |
| Reported remedied | 48209 (92%) |
| Reported unreachable | 65 |
| Reported removed | 520 |
These are the manufacturer's totals for the whole campaign at the end of 2026 quarter 2, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Hyundai Motor America (Hyundai) is recalling certain 2023-2024 Palisade Tucson, 2023 Sonata, Elantra, and Kona vehicles. The electronic controller for the Idle Stop & Go oil pump assembly may contain damaged electrical components that can cause the pump controller to overheat.
What can happen
An electric oil pump assembly that overheats increases the risk of a vehicle fire.
The remedy
Owners are advised to park outside and away from structures until the recall repair is complete. Dealers will inspect and replace the electric oil pump controller, as necessary, free of charge. Owner notification letters were mailed starting September 7, 2023. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 246.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
| 2023 HYUNDAI ELANTRA | |
|---|---|
| 2023 HYUNDAI KONA | |
| 2023 HYUNDAI PALISADE | |
| 2024 HYUNDAI PALISADE | |
| 2023 HYUNDAI SONATA | |
| 2023 HYUNDAI TUCSON | |
| 2024 HYUNDAI TUCSON |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 23-FL-007H | 2023-12-22. Service bulletin. This bulletin provides the procedure to update the Transmission Control Module (TCM) for the 2022MY Tucson (NX4/NX4a) vehicles and the Engine Control Module (ECM) for the 2022-24MY Tucson vehicles to improve operation of the Idle Stop and Go (ISG) system. Under certain circumstances the vehicle may not restart after ISG system has engaged and require a manual restart due to the lack of intake manifold pressure recovery. |
|---|---|
| 23-EM-004H | 2023-10-02. Service bulletin. Certain 2023MY Kona (OS) and Elantra (CN7) vehicles equipped with the 2.0L Nu Atkinson engine may experience a warning lamp illumination for a diagnostic trouble code P250C that is related to the oil level sensor circuit. Follow the service procedure outlined in this bulletin to reprogram the powertrain control module to update the oil level sensor warning light logic. • DTC P250C - “Engine Oil Level Sensor Circuit Low” |
| 23-AT-006H-1 | 2023-09-05. Service bulletin. This TSB provides information to diagnose the push button shifter operation. If you are servicing a vehicle with any symptoms listed below or DTCs (listed on Page 2) , follow the Service Procedure on Page 3. SYMPTOMS: • “Shifter System Malfunction” displayed in the cluster • Won’t shift into or out of gear or won’t shift out of Park • Incorrect gear display in cluster and/or won’t start |
| 23-AT-009H | 2023-08-02. Service bulletin. If you are servicing an 8-speed DCT front-wheel-drive vehicle with the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition. • DIAGNOSTIC TROUBLE CODES: ➢ P070500 - Transmission range sensor circuit malfunction ➢ P070512 - Transmission range sensor circuit malfunction ➢ P070514 - Transmission range sensor circuit malfunction ➢ P07051C - Transmission range sensor circuit malfunction ➢ P070600 - Transmission range sensor circuit range/performance ➢ P070661 - Transmission range sensor circuit range/performance ➢ P070696 - Transmission range sensor circuit range/performance • SYMPTOMS: ➢ Malfunction Indicator Light (MIL) illuminated ➢ 5th gear fail-safe ➢ Intermittently won’t shift into D or R ➢ Intermittently won’t shift out of P ➢ Intermittent ly no engine crank in “P” or “ |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.