NHTSA recall 21V089000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 21V089000 |
| Manufacturer | BMW of North America, LLC |
| Reported | 2021-02-18 |
| Owners notified | 2021-03-02 |
| Component | SERVICE BRAKES, HYDRAULIC:CRITICAL FASTENERS; SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC |
| Units potentially affected | 9 |
| Part numbers | 6860912-03 |
| Report | Quarterly report 1, for 2021 quarter 1 |
|---|---|
| Filed with NHTSA | 2021-04-30 |
| Vehicles in the campaign | 9 |
| Reported remedied | 9 (100%) |
| Reported unreachable | 0 |
| Reported removed | 0 |
These are the manufacturer's totals for the whole campaign at the end of 2021 quarter 1, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
BMW of North America, LLC (BMW) is recalling certain 2021 X5 sDrive40i and X5 xDrive40i vehicles. The right front brake disc may have been assembled with incorrect fasteners, which over time, could result in the front brake disc becoming loose.
What can happen
A loose brake disc could affect vehicle handling and control, and increase the risk of a crash.
The remedy
BMW will notify owners, and dealers will inspect the right front brake disc and replace it if necessary, along with the unaffected left side brake disc, free of charge. There are no owner vehicles affected; therefore, owner notification is not necessary and, as such, a planned owner notification date is not entered into the recall schedule. Owners may contact BMW's customer service at 1-800-525-7417.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2021 BMW X5 |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SIB510623 | 2023-05-15. Service bulletin. The hazard light (aka emergency flasher) button gets stuck in the ON or OFF position when actuated. |
|---|---|
| SIB170220 | 2022-10-17. Service bulletin. Symptom 1: There are traces of coolant leaking under the vehicle, or there is significant pressure released along with coolant loss when opening the low temperature cooling system reservoir (engine cold). The following fault code may also be stored in the DME: 20A201 - Charge air cooling system: Coolant pump protective function activated due to dry running Symptom 2*: The air conditioning may have low cooling output with the following fault stored in the IHKA: 80120A - Compressor: Shut down due to overpressure in refrigerant system. Symptom 2 is an additional symptom related to Symptom 1. Diagnose the IHKA fault with ISTA test plans if it is the only fault stored (if no DME faults are stored related to coolant loss, this bulletin repair does not apply). |
| SIB340721 | 2021-12-13. Service bulletin. When starting the vehicle vehicle at standstill, various yellow Check Control Messages CCMs appear. ID code 00042: Brake system. Additional notes: Avoid abrupt braking as far as possible. Drive at a moderate speed. Have it checked by your nearest Service Center. ID code 2046: Braking force assistance. Additional notes: Braking force assistance failure. Higher pedal force required for vehicle deceleration. Drive at a moderate speed. Have it checked by your nearest Service Center. |
| B341019 | 2021-11-08. Service bulletin. Inform the customer during a consultation that the M Compound (standard equipment) and M Carbon Ceramic (optional) brakes are high-performance brake systems which are designed for sporty, dynamic driving styles. As a side effect of the highest possible brake performance, customers are likely to hear noises due to the extremely resilient materials. In the same conversation, inform the customer that his/her braking performance can help ensure that the noises do not occur or disappear quickly. |
| B341019 | 2021-09-07. Service bulletin. Inform the customer during a consultation that the M Compound (standard equipment) and M Carbon Ceramic (optional) brakes are high-performance brake systems which are designed for sporty, dynamic driving styles. As a side effect of the highest possible brake performance, customers are likely to hear noises due to the extremely resilient materials In the same conversation, inform the customer that his/her braking performance can help ensure that the noises do not occur or disappear quickly. |
| B360121 | 2021-05-24. Service bulletin. Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form. |
| B340414 | 2021-05-24. Service bulletin. Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.