NHTSA recall 20V759000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 20V759000 |
| Manufacturer | Nissan North America, Inc. |
| Reported | 2020-12-08 |
| Owners notified | 2021-01-27 |
| Component | ENGINE; ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD |
| Units potentially affected | 7583 |
| Part numbers | 24011 9FV0C, 24011 9FV1B, 24011 9FV0B |
| Report | Annual report 3, for 2025 quarter 1 to 2025 quarter 4 |
|---|---|
| Filed with NHTSA | 2026-01-26 |
| Vehicles in the campaign | 7583 |
| Reported remedied | 7301 (96%) |
| Reported unreachable | 0 |
| Reported removed | 0 |
These are the manufacturer's totals for the whole campaign at the end of 2025 quarter 4, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Nissan North America, Inc. (Nissan) is recalling certain 2020 Titan and Titan XD pickup trucks. The engine wiring harness could contain an exposed wire that can cause an electrical short or arcing if it contacts another wire.
What can happen
An electrical short can impair the performance of the engine, transmission, or fuel pump, increasing the risk of an engine stall and a crash. An electrical short or arcing increases the risk of a fire.
The remedy
Nissan will notify owners, and dealers will inspect the engine harness, replacing it if necessary, free of charge. The recall began January 27, 2021. Owners may contact Nissan customer service at 1-800-647-7261
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2020 NISSAN TITAN |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| NTB22-020 | 2022-05-20. Service bulletin. SERVICE INFORMATION FOR BRAKE SWITCH ADJUSTMENT FOR DTC C1142 AND/OR C1116 STORED SERVICE INFORMATION DTC C1142 (PRESS SEN CIRCUIT) and/or C1116 (STOP LAMP SW) may be stored if the Stop Lamp Switch and/or the Brake Pedal Position Switch are out of adjustment. Before replacing any components for DTCs C1142 (PRESS SEN CIRCUIT) and/or C1116 (STOP LAMP SW), stored as past or current, confirm that the Stop Lamp Switch and the Brake Pedal Position Switch are properly adjusted. If either the Stop Lamp Switch and/or the Brake Pedal Position Switch are found to be out of adjustment, adjust them as per the ESM, and then clear the DTCs and perform DTC confirmation. • Refer to the ESM: BRAKES > BRAKE SYSTEM > PERIODIC MAINTENANCE > BRAKE PEDAL > Adjustment |
|---|
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.