NHTSA recall 18V632000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 18V632000 |
| Manufacturer's number | RE 18/11 |
| Manufacturer | Bentley Motors, Inc. |
| Reported | 2018-09-14 |
| Owners notified | 2018-10-19 |
| Component | BACK OVER PREVENTION: SENSING SYSTEM: CAMERA |
| Units potentially affected | 12 |
| Report | Quarterly report 6, for 2020 quarter 1 |
|---|---|
| Filed with NHTSA | 2020-04-21 |
| Vehicles in the campaign | 12 |
| Reported remedied | 11 (91%) |
| Reported unreachable | 0 |
| Reported removed | 0 |
These are the manufacturer's totals for the whole campaign at the end of 2020 quarter 1, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Bentley Motors, Inc. (Bentley) is recalling certain 2018 Bentley Mulsanne and 2018 Bentayga vehicles. When reverse gear has been selected, the rearview camera display may be obstructed or may not be fully visible within two seconds. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
What can happen
If the full camera view is obstructed or delayed and the driver does not check their surroundings before backing up, there may be an increased risk of a crash.
The remedy
Bentley will notify owners, and dealers will reprogram the software in the infotainment system, free of charge. The recall began October 19, 2018. Owners may contact Bentley customer service at 1-800-777-6923. Bentley's number for this recall is RE 18/11.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2018 BENTLEY BENTAYGA | Built 2018-05-02 to 2018-05-03. |
|---|---|
| 2018 BENTLEY MULSANNE | Built 2018-05-10 to 2018-07-25. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 2059392/7 | 2026-08-05. Service bulletin. Bentayga - PDC system not working or PDC system false detection. Customer statement: • PDC system not working or PDC system false detection • Warning evident within the DIP |
|---|---|
| 2059392/6 | 2026-01-06. Service bulletin. Bentayga - PDC system not working or PDC system false detection. Customer statement: • PDC system not working or PDC system false detection • Warning evident within the DIP |
| 2075034/3 | 2025-07-30. Service bulletin. EPB Warning light in DIP - Front door/s power latch system intermittent - DTC U112300 within Address 03 and Address 46. Condition: One or a combination of the following is evident within the DIP • Electronic parking brake warning And/or • Drivers door power latch intermittent operation warning |
| 2059392/5 | 2025-03-08. Service bulletin. Bentayga - PDC system not working or PDC system false detection. |
| 2075034/2 | 2024-11-01. Service bulletin. EPB Warning light in DIP - Front door/s power latch system intermittent - DTC U112300 within Address 03 and Address 46. Customer statement / workshop findings: One or a combination of the following is evident within the DIP • Electronic parking brake warning And/or • Drivers door power latch intermittent operation warning |
| 2051045/8 | 2023-08-03. Service bulletin. Night vision camera washer jet nozzle leaking. Customer statement / workshop findings: Washer fluid dripping/leaking from the night vision camera jet nozzle. Technical background: Please note: The photographs shown within this TPI are not based on a specific vehicle type, the procedure to replace the night vision non return valve is the same regardless of vehicle type In the event the afore mentioned symptom is evident the operative should refer to the Measure section of this TPI to replace the non return valve. |
| 2055254.4 | 2023-07-08. Service bulletin. Top view/Rear view camera - guidelines not visible Customer Statement: -Guidelines not showing on display screen when reverse gear selected. |
| 2053347.2 | 2019-07-01. Service bulletin. Front camera parameters (SC19/04) |
| 2051045.3 | 2019-07-01. Service bulletin. Night vision camera - Washer jet leaking |
| 2053347-1 | 2019-04-22. Service bulletin. Front camera parameters (SC19/04) |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.