NHTSA recall 18V147000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 18V147000 |
| Manufacturer's number | U24 |
| Manufacturer | Chrysler (FCA US LLC) |
| Reported | 2018-03-06 |
| Owners notified | 2018-04-25 |
| Component | VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR |
| Units potentially affected | 1505 |
| Report | Quarterly report 6, for 2019 quarter 3 |
|---|---|
| Filed with NHTSA | 2019-10-25 |
| Vehicles in the campaign | 1505 |
| Reported remedied | 1466 (97%) |
| Reported unreachable | 3 |
| Reported removed | 5 |
These are the manufacturer's totals for the whole campaign at the end of 2019 quarter 3, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Chrysler (FCA US LLC) is recalling certain 2018 Alfa Romeo Stelvio vehicles. The software for the wiper motor may incorrectly interpret the wiper motor as overheating, limiting the windshield wipers to operating only at the low-speed setting. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 104, "Windshield Wiping and Washing Systems."
What can happen
Limited wiper function can reduce the driver's visibility, increasing the risk of a crash.
The remedy
Chrysler will notify owners, and dealers will replace the wiper motor, free of charge. The recall began on April 25, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U24.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2018 ALFA ROMEO STELVIO | Built 2017-04-12 to 2017-08-28. |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 05152029 | 2022-10-17. Service bulletin. Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you. |
|---|---|
| 9003109 | 2022-09-15. Service bulletin. Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248) 248-622-6417 if you have questions or need additional information. |
| 9003109 | 2018-06-04. Service bulletin. Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248) 248-622-6417 if you have questions or need additional information. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.