WenmarOpen by Wenmar Pro

NHTSA recall 16V487000

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

Campaign
Published byNHTSA (United States)
Campaign number16V487000
Manufacturer's numberToyota G0U Lexus GLJ
ManufacturerToyota Motor Engineering & Manufacturing
Reported2016-06-30
Owners notified2016-10-17
ComponentAIR BAGS:SIDE/WINDOW
Units potentially affected482002
Remedy progress the manufacturer reported
ReportQuarterly report 6, for 2018 quarter 1
Filed with NHTSA2018-04-27
Vehicles in the campaign482002
Reported remedied334252 (69%)
Reported unreachable45558
Reported removed0

These are the manufacturer's totals for the whole campaign at the end of 2018 quarter 1, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.

What is wrong

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2010-2012 Toyota Prius, 2010 and 2012 Toyota Prius Plug-in Hybrid, and 2011-2012 Lexus CT200h vehicles. A weld in the curtain shield air bag inflator may crack causing one or both portions of the inflator to eject into the passenger cabin.

What can happen

If either portion of the curtain shield air bag inflator ejects into the passenger cabin, there is an increased risk of injury to vehicle occupants.

The remedy

Toyota will notify owners, and dealers will install retention brackets to the curtain shield air bags, free of charge. The recall began on October 17, 2016. Owners may contact Toyota Customer Service Department at 1-800-331-4331. Toyota's number for this recall is Toyota G0U, and Lexus GLJ.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Vehicles this campaign lists
2011 LEXUS CT HYBRIDBuilt 2010-08-23 to 2012-04-27.
2012 LEXUS CT HYBRIDBuilt 2010-08-23 to 2012-04-27.
2010 TOYOTA PRIUSBuilt 2008-10-21 to 2012-04-27.
2011 TOYOTA PRIUSBuilt 2008-10-21 to 2012-04-27.
2012 TOYOTA PRIUSBuilt 2008-10-21 to 2012-04-27.
2010 TOYOTA PRIUS PLUG-IN HYBRIDBuilt 2009-11-27 to 2010-10-21. Listed as a series or trim of this model.
2012 TOYOTA PRIUS PLUG-IN HYBRIDBuilt 2011-07-20 to 2012-04-27. Listed as a series or trim of this model.

A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.

Bulletins for the same vehicles and component

Bulletins for the same vehicles and component
TSB0032202023-10-16. Service bulletin. TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
T-SB-0094-21 Rev2022-12-19. Service bulletin. TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
Toyota Safety Re2021-04-19. Service bulletin. Toyota Safety Recall and Service Campaign - Technician Certification Requirements
T-TT-0213-132018-04-23. Service bulletin. Toyota vehicles are equipped with SRS, including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pretensioner devices did not perform as expected, please follow the steps in the recommendations section below.
T-TT-0293-142018-04-02. Service bulletin. Tech Tip: Safety Connect is a vehicle option which requires a subscription fee for the system to be active. The first year of service is provided in the vehicle purchase price. Once the subscription has lapsed the DCM will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service.
T-SB-0218-17_Rev2018-04-02. Service bulletin. TSB: REVISION NOTICE July 20, 2017 Rev1: Applicability has been updated to exclude 2007 ? 2017 model year Avanza vehicles. Some hazardous material treatment and handling regulations at the state and local level define the pre-disposal deployment of airbag and pre-tensioner assemblies as hazardous material treatment. Hazardous material treatment may require special training, certification or licensing in certain areas. TMS recommends that dealership personnel carefully review and follow ALL local and state regulations, and where necessary, contract with Environmental Protection Agency (EPA) Licensed Hazardous Waste Transportation and Disposal facilities.
T-SB-0226-12 Rev2018-04-02. Service bulletin. Some 2012 model year Prius and Prius PHV vehicles may exhibit a lower-than-expected speaker volume on the Safety Connect system, which may make the audio prompts difficult to understand. An updated wire harness is available to address this condition.
T-SB-0035-13 Rev2018-04-02. Service bulletin. Some 2012 model year Corolla, Prius, Prius V, Sienna, and Venza vehicles may set SRS Diagnostic Trouble Codes (DTCs) that are not listed in the Repair Manual. Refer to the chart in this bulletin to diagnose these DTCs.
T-SB-0122-11 Rev2018-04-02. Service bulletin. Beginning in 1998, Toyota introduced side airbags as optional equipment. Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Toyota may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in severe occupant injuries. Seat covers are an integral part of this safety system. Replacing fabric seat covers with non-Toyota leather or other seat cover materials may compromise the effectiveness of this safety system. The design of the seat is complex, integrating safety and strength with comfort and luxury. Toyota strongly discourages modifying original equipment seats that have optional side airbags. Additionally, Toyota strongly advises against the installation or use of aftermarket seat covers, which could impair the performance of the side airbags in the event of an accident.
T-TT-0213-132018-04-02. Service bulletin. Toyota vehicles are equipped with Supplemental Restraint Systems (SRS), including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pre-tensioner devices did not perform as expected (including an unintended deployment event), please follow the steps in the recommendations section below.

A bulletin is the manufacturer's note to its dealers. It is not part of this recall.

Check one vehicle officially