NHTSA recall 16V125000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 16V125000 |
| Manufacturer's number | 28030 |
| Manufacturer | General Motors LLC |
| Reported | 2016-03-02 |
| Owners notified | 2016-04-14 |
| Component | AIR BAGS:FRONTAL |
| Units potentially affected | 1579 |
| Report | Quarterly report 6, for 2017 quarter 3 |
|---|---|
| Filed with NHTSA | 2017-10-09 |
| Vehicles in the campaign | 1579 |
| Reported remedied | 1511 (95%) |
| Reported unreachable | 0 |
| Reported removed | 0 |
These are the manufacturer's totals for the whole campaign at the end of 2017 quarter 3, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
General Motors LLC (GM) is recalling certain model year 2016 Chevrolet Colorado vehicles manufactured January 19, 2016, to February 2, 2016, Chevrolet Malibu vehicles manufactured January 9, 2016, to January 26, 2016, and 2016 GMC Canyon vehicles manufactured January 21, 2016, to February 4, 2016. The driver frontal air bag may improperly inflate during second-stage deployment in the event of a high speed crash.
What can happen
An improperly inflated air bag increases the risk of injury.
The remedy
GM will notify owners, and dealers will replace the driver side frontal air bag module, free of charge. The recall began on April 14, 2016. Owners may contact Chevrolet customer service at 1-800-222-1020, and GMC customer service at 1-800-462-8782. GM's number for this recall is 28030.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2016 CHEVROLET COLORADO | Built 2016-01-19 to 2016-02-02. |
|---|---|
| 2016 CHEVROLET MALIBU | Built 2016-01-09 to 2016-01-26. |
| 2016 GMC CANYON | Built 2016-01-21 to 2016-02-04. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 15NA087 | 2024-02-12. Service bulletin. Stop/Start System (RPO KL9) Inhibited with Malfunction Indicator Light (MIL) ON, and DTC P16DC Set |
|---|---|
| GCUS3407 | 2024-01-08. Service bulletin. GM shipped sixteen 2016 model year Chevrolet Malibu's that did not complete final end-of-the-line testing at the assembly plant. The airbag malfunction indicator light in these vehicles should be illuminated; this MIL light indicates that the vehicle's sensing and diagnostic module is not locked. Typically this would be found during PDI. TheseSDM modules must be locked before the vehicles can be sold. GM is currently working on a calibration to address this condition. |
| PIT5509K | 2023-06-13. Service bulletin. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicle that may have a "Check Trailer Wiring" or "Service Trailer Brake System? message on the Driver Information Center when a trailer is connected to the vehicle. Diagnostic Trouble Code C1114 set in the Chassis Control Module. Chassis Control Module has to determine the type of trailer brake system that is being used. The Chassis Control Module can be sensitive to a variety of trailer wiring issues. The technician will need to make a trailer tester using Electric Trailer Brake Magnets and 7-way trailer connector to determine if it is a vehicle or trailer issue. If the concern is not duplicated with the tester installed, the vehicle is operating correctly and the focus should be on the trailer wiring or 7 way connector. |
| PIT5994 | 2023-04-17. Service bulletin. This Preliminary information communication provides information to the technician with diagnostic tips for diagnosing reduced or low engine power with no Driver Information Center messages, that may be caused by an inaccurate brake pedal position sensor. |
| PIT5509H | 2021-09-13. Service bulletin. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicle that may have a "Check Trailer Wiring" or "Service Trailer Brake System? message on the Driver Information Center when a trailer is connected to the vehicle. Diagnostic Trouble Code C1114 set in the Chassis Control Module. Chassis Control Module has to determine the type of trailer brake system that is being used. The Chassis Control Module can be sensitive to a variety of trailer wiring issues. The technician will need to make a trailer tester using Electric Trailer Brake Magnets and 7-way trailer connector to determine if it is a vehicle or trailer issue. If the concern is not duplicated with the tester installed, the vehicle is operating correctly and the focus should be on the trailer wiring or 7 way connector. |
| PIC5650J | 2021-09-13. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies. |
| PIT5499B | 2020-06-15. Service bulletin. This Preliminary Information communication provides information to the technician that vehicles may have an Antilock Braking System or Malfunction Indicator Lamp illuminated. Also Low Brake Fluid lamp on with the master cylinder fluid level is full or a Service Trailer Brake message on the Driver Information Center. Technician may find codes C0035, C0040, C0045, C0050, C0055, C0267, U0121, U0415 or U0420. Technician will need to inspect the Electronic Brake Control Module connector for water intrusion or corrosion on the terminals. If either is found, replace the EBCM and replace the affected terminals. Also remove the tape from the conduit leading to G400 between the main harness and the ground lug. |
| 18NA351 | 2019-03-25. Service bulletin. This technical bulletin provides a procedure to program the SDM and replace the airbags and pretensioners if deployed. |
| 17NA103 | 2018-05-21. Service bulletin. This Technical bulletin explains how the airbag electrical connector may not be installed completely and may need to be re connected to correct the codes that were set. |
| 12-09-41-002C | 2017-08-31. Service bulletin. This informational bulletin provides information on Passenger Presence System (PPS) May Command Seat Belt Reminder Chime and Passenger Airbag Indicator On or Set DTC B101D When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.