NHTSA recall 15V178000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 15V178000 |
| Manufacturer's number | R14 |
| Manufacturer | Chrysler (FCA US LLC) |
| Reported | 2015-03-27 |
| Owners notified | 2015-07-10 |
| Component | STRUCTURE:BODY:DOOR |
| Units potentially affected | 1455 |
| Report | Quarterly report 6, for 2016 quarter 4 |
|---|---|
| Filed with NHTSA | 2017-01-24 |
| Vehicles in the campaign | 1455 |
| Reported remedied | 1052 (72%) |
| Reported unreachable | 60 |
| Reported removed | 4 |
These are the manufacturer's totals for the whole campaign at the end of 2016 quarter 4, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Chrysler (FCA US LLC) is recalling certain model year 2013-2014 Dodge Viper vehicles manufactured October 1, 2012, to February 6, 2014. Moisture may get into the door switch, resulting in the driver or passenger door opening unexpectedly while the vehicle is in motion.
What can happen
If the driver or passenger door opens unexpectedly while the vehicle is in motion, there is an increased risk of a crash and injury.
The remedy
Chrysler will notify owners, and dealers will replace the door handle assemblies and top covers, free of charge. The recall began on July 10, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R14.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2013 DODGE VIPER | Built 2012-10-01 to 2014-02-06. |
|---|---|
| 2014 DODGE VIPER | Built 2012-10-01 to 2014-02-06. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 31-001-25 REV. A | 2025-08-21. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. |
|---|---|
| 31-001-25 REV. B | 2025-08-21. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. |
| 31-001-25 | 2025-08-21. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates |
| 31-001-24 | 2024-07-30. Service bulletin. "Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels." |
| 3100123 | 2024-01-02. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels. |
| 3100123 | 2023-04-17. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels. |
| 31-002-22 | 2023-01-17. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels. |
| 3100122 | 2023-01-09. Service bulletin. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components. |
| 3100122 | 2022-10-31. Service bulletin. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components. |
| 3100122 | 2022-10-31. Service bulletin. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.