NHTSA recall 15V099000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 15V099000 |
| Manufacturer | Toyota Motor Engineering & Manufacturing |
| Reported | 2015-02-23 |
| Owners notified | 2015-03-13 |
| Component | WHEELS; TIRES |
| Units potentially affected | 18 |
| Report | Quarterly report 3, for 2015 quarter 3 |
|---|---|
| Filed with NHTSA | 2015-10-30 |
| Vehicles in the campaign | 18 |
| Reported remedied | 18 (100%) |
| Reported unreachable | 0 |
| Reported removed | 0 |
These are the manufacturer's totals for the whole campaign at the end of 2015 quarter 3, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2015 Tacoma pickup trucks manufactured August 7, 2014, to December 22, 2014. The affected vehicles may have had their tires and wheels changed to TRD PRO accessory tires and wheels, causing the inflation information on the tire placard to be incorrect which may result in the tire being improperly inflated. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 110, "Tire Selection and Rims and Motor Home/Recreation Vehicle Trailer Load Carrying Capacity Information for Motor Vehicles with a GVWR of 4,536 kilograms (10,000 pounds) or less."
What can happen
Improperly inflated tires may increase the risk of a vehicle crash.
The remedy
Toyota will notify owners, and dealers will send a revised tire placard with correct tire size and inflation information to owners, free of charge. The recall began March 13, 2015. Owners may contact Toyota customer service at 1-800-331-4331.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2015 TOYOTA TACOMA | Built 2014-08-07 to 2014-12-22. |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| Toyota PRO19-02 | 2022-02-14. Service bulletin. POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well. |
|---|---|
| T-TT-0315-14 Rev | 2018-04-02. Service bulletin. TT: Chrometec (plastic clad) wheels are being damaged during mounting and dismounting of tires. |
| T-TT-0424-16 | 2018-04-02. Service bulletin. TT: Front Brake Vibration Key Points: * Issue can occur at any time if improper torque is applied on lug nuts * Over time, even one lug nut over or under torqued, can cause a vibration issue * When lug nuts are over torqued, this causes the rotor to have a runout out condition which can lead to brake vibration concerns * Brake vibration issues can occur at parking lot to highway speeds * Brake vibration issues can occur at light to moderate braking * Tightening lug nuts in a star pattern method during the torqueing process will assure that even/equal pressure is applied across the rotor hub surface * Torque sticks/wrenches should be used to apply accurate torque values when tightening * Do Not use impact guns/ratchets to completely run lug nuts up to the wheel surface |
| T-SB-0026-14 | 2018-04-02. Service bulletin. During the manufacturing process tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. |
| T-SB-0187-12_Rev | 2018-04-02. Service bulletin. TSB: REVISION NOTICE February 12, 2018 Rev2: ? Applicability has been updated to include 2015 ? 2018 model year vehicles. January 23, 2014 Rev1: ? Applicability has been updated to include 2013 ? 2014 model year vehicles. Any previous printed versions of this bulletin should be discarded. Toyota vehicles are equipped with either conventional or run-flat tires. Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to service. With a conventional tire it is not possible to drive for an extended amount of time with the tire at low pressures as damage to the tire may occur. With run-flat tires, due to reinforced sidewalls, it is possible to drive for up to 100 miles at speeds less than 55 mph with little or no damage to the tire. The U.S. Tire Manufacturers Association (UTSMA) provides guidelines and recommendations for tire repair and replacement. It also provides information related to: ? Basic tire information ? Tire maintenance and safety ? Driver education, tire safety curriculum. |
| T-SB-0187-12_Rev | 2018-03-12. Service bulletin. TSB: REVISION NOTICE February 12, 2018 Rev2: ? Applicability has been updated to include 2015 ? 2018 model year vehicles. January 23, 2014 Rev1: ? Applicability has been updated to include 2013 ? 2014 model year vehicles. Any previous printed versions of this bulletin should be discarded. Toyota vehicles are equipped with either conventional or run-flat tires. Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to service. With a conventional tire it is not possible to drive for an extended amount of time with the tire at low pressures as damage to the tire may occur. With run-flat tires, due to reinforced sidewalls, it is possible to drive for up to 100 miles at speeds less than 55 mph with little or no damage to the tire. The U.S. Tire Manufacturers Association (UTSMA) provides guidelines and recommendations for tire repair and replacement. It also provides information related to: ? Basic tire information ? Tire maintenance and safety ? Driver education, tire safety curriculum. |
| T-TT-0315-14 | 2017-08-14. Service bulletin. TT: Chrometec (plastic clad) wheels are being damaged during mounting and dismounting of tires. Refer to photos below for identifying plastic and aluminum portions of wheel: |
| T-SB-0026-14 Rev | 2017-08-14. Service bulletin. TSB: During the manufacturing process tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Please refer to the following procedure to ensure that the original tires stay in the same location on the vehicle. |
| T-TT-0315-14 | 2017-08-01. Service bulletin. TT: Chrometec (plastic clad) wheels are being damaged during mounting and dismounting of tires. |
| T-SB-0026-14 REV | 2017-03-30. Service bulletin. "TSB: DURING THE MANUFACTURING PROCESS TIRES ARE MOUNTED ON THE VEHICLE AS MATCHED SETS TO HELP REDUCE CONDITIONS SUCH AS PULLING OR DRIFTING. IF THE WHEELS ARE REPLACED OR REFINISHED BEFORE VEHICLE DELIVERY, IT IS IMPORTANT THAT THE TIRES REMAIN ON THE VEHICLE IN THE SAME LOCATION AND IN THE SAME DIRECTION OF ROTATION. PLEASE REFER TO THE FOLLOWING PROCEDURE TO ENSURE THAT THE ORIGINAL TIRES STAY IN THE SAME LOCATION ON THE VEHICLE." |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.