NHTSA recall 14V524000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 14V524000 |
| Manufacturer's number | 14V01 |
| Manufacturer | Ford Motor Company |
| Reported | 2014-09-02 |
| Owners notified | 2014-09-09 |
| Component | FUEL SYSTEM, DIESEL |
| Units potentially affected | 1673 |
What is wrong
Ford Motor Company (Ford) is recalling certain model year 2015 Ford F-650 SD trucks manufactured May 12, 2014, to July 22, 2014 and Ford F-750 SD trucks manufactured May 12, 2014, to August 4, 2014. The Cummins ISB or ISL engines in these vehicles may have been equipped with Fleetguard UFF-XT fuel filters, part number FF63009, whose filter shell may separate from the fuel filter nut plate causing the engine to stall without warning.
What can happen
If the engine stalls unexpectedly there is an increased risk of a crash.
The remedy
Cummins will notify the owners of the affected Ford vehicles, and Cummins service centers will replace the fuel filter with a non-defective one, free of charge. The recall began in September 2014. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14V01. Owners may also contact Cummins customer service at 1-800-223-4583.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2015 FORD F-650 SD | Built 2014-05-12 to 2014-07-22. Listed as a series or trim of this model. |
|---|---|
| 2015 FORD F-750 SD | Built 2014-05-12 to 2014-08-04. Listed as a series or trim of this model. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| TSB160064 | 2021-12-20. Service bulletin. 6.7L Diesel - fuel knock at idle with malfunction indicator lamp (MIL) Illulminated with multiple diagnostic trouble codes (DTCS) |
|---|---|
| TSB160049 | 2021-12-20. Service bulletin. 6.7L Diesel - Fuel knock at idle with malfunction indicat or lamp (MIL) Illuminated with multiple diagnostic trouble codes (DTCSF) |
| TSB160001 | 2021-12-20. Service bulletin. 49 CFR Part 579.5 Monthly Communications - March 2016 Air bag warning light illuminated with diagnostic trouble code (DTC) B141B and/or B141C |
| LTR3756 | 2021-12-20. Service bulletin. 49 CFR Part 579.5 Monthly Communications - January 2016 |
| TSB150158 | 2021-12-20. Service bulletin. 6.7L Diesel - Malfunction Indicator Lamp (Mil) Illuminated - Diagnostic Ttouble Codes (DTCS) P2002, P246C And/Or P2463- Built On Or Before 09/09/2015 |
| TSB150152 | 2021-12-20. Service bulletin. 6.7L Diesel - Malfunction Indicator Lamp (Mil) Illuminated - Diagnostic Ttouble Codes (DTCS) P2002, P246C And/Or P2463- Built On Or Before 03/26/2015. |
| 16-0064 | 2020-12-07. Service bulletin. Some 2011-2016 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit a fuel knock type noise at idle, illuminated MIL with one or more of the following DTCs: P0263, P0266, P0269, P0272, P0275, P0278, P0281, P0284, |
| SSM 47836 | 2019-04-08. Service bulletin. Some 2011-2019 F-Super Duty 6.7L diesel equipped vehicles may exhibit a ticking/tapping noise traced to the reductant injector. |
| SSM 47836 | 2019-04-01. Service bulletin. Some 2011-2019 F-Super Duty 6.7L diesel equipped vehicles may exhibit a ticking/tapping noise traced to the reductant injector. |
| SSM 47402 | 2018-09-10. Service bulletin. When performing diagnostics for DTCs P2201, P2452, P2459, P246C and/or P2463, a manual regeneration and diesel particulate filter (DPF) parameter reset using the appropriate scan tool may need to be performed. To perform the manual regeneration, go to the Toolbox tab > Powertrain > Service Functions > Diesel Particulate Regeneration System > DPF Manual Regeneration. The scan tool may indicate that a regeneration of the DPF is not recommended at this time, selecting YES on this screen will allow the regeneration process to complete. To perform the DPF parameter reset, go to the Toolbox tab > Powertrain > Service Functions > Diesel Particulate Regeneration System > DPF Parameter Reset. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.