NHTSA recall 13V249000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 13V249000 |
| Manufacturer | Tesla Motors, Inc |
| Reported | 2013-06-14 |
| Owners notified | 2013-06-19 |
| Component | SEATS |
| Units potentially affected | 1228 |
What is wrong
Tesla Motors, Inc. (Tesla) is recalling certain model year 2013 Model S electric vehicles manufactured May 10, 2013, through June 8, 2013. An improper method for aligning the left hand seat back striker to the bracket may have weakened the weld between the bracket and the frame of the vehicle.
What can happen
In the event of a crash, the left hand seat back may not stay mounted, increasing the risk of injury to passengers.
The remedy
Tesla will notify owners, and Tesla Service Centers will inspect the left hand second row strikers. Tesla will add additional mounting hardware to ensure a proper joint between the bracket and the frame, free of charge. The recall began on June 24, 2013. Owners may contact Tesla at 1-650-681-5000.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| 2013 TESLA MODEL S | Built 2013-05-10 to 2013-06-08. |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SB-18-13-002 R2 | 2019-06-10. Service bulletin. On some Model S base trim front seats, the forward inboard Huck BOM fastener and pivot bushing (nearest to the center console) used on the front lift links may develop an interactive clearance condition, which might result in a rocking motion in the seat. This does not affect performance, but might result in customer dissatisfaction. |
|---|---|
| SB-18-13-002 R1 | 2019-02-19. Service bulletin. On some Model S base trim front seats, the forward inboard Huck BOM fastener and pivot bushing (nearest to the center console) used on the front lift links may develop an interactive clearance condition, which might result in a rocking motion in the seat. This does not affect performance, but might result in customer dissatisfaction. |
| SB-18-13-002 | 2018-08-06. Service bulletin. On some Model S base trim 1st row seats, the Huck BOM fastener and pivot bushing used on the front lift links may develop an interactive clearance condition, which might result in a rocking motion in the seat. This does not affect performance, but might result in customer dissatisfaction. |
| SB1313001R6 | 2016-10-07. Service bulletin. THIS SERVICE BULLETIN CONTAINS INSTALLATION INSTRUCTIONS FOR THE OPTIONAL THIRD ROW SEAT. INCLUDED IN THIS PROCEDURE ARE STEPS TO ADD THE REAR CROSSMEMBER (IF NEEDED), REMOVE AND MODIFY EXISTING TRIM PANELS, INSTALL HARDWARE, ADD THE 2ND ROW SEATBACK BEZEL, AND ADJUST THE LATCH ASSEMBLY. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.