NHTSA recall 11V436000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 11V436000 |
| Manufacturer's number | 430 |
| Manufacturer | TRIUMPH MOTORCYCLES AMERICA LTD |
| Reported | 2011-08-22 |
| Owners notified | 2011-08-26 |
| Component | STRUCTURE:MOTORCYCLE:KICKSTAND/CENTER STAND |
| Units potentially affected | 668 |
What is wrong
TRIUMPH IS RECALLING CERTAIN MODEL YEAR 2011-2012 TIGER 800 AND TIGER 800 XC MOTORCYCLES MANUFACTURED FROM SEPTEMBER 2010 THROUGH JUNE 2011. THE OPTIONAL ACCESSORY CENTER STAND ASSEMBLY CONTAINS A DEFECTIVE RETURN SPRING THAT MAY BREAK.
What can happen
IF THE RETURN SPRING BREAKS, THE CENTER STAND MAY UNEXPECTEDLY DROP AND DRAG ALONG THE ROAD SURFACE, INCREASING THE RISK OF A CRASH.
The remedy
DEALERS WILL REPLACE THE RETURN SPRING AND REPAIR THE MOTORCYCLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 26, 2011. OWNERS MAY CONTACT TRIUMPH CUSTOMER SERVICE DEPARTMENT AT 1-678-854-2010.
Notes
TRIUMPH'S SAFETY RECALL NO. 430.OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
| 2011 TRIUMPH TIGER 800 | Built 2010-09-01 to 2011-06-30. |
|---|---|
| 2012 TRIUMPH TIGER 800 | Built 2010-09-01 to 2011-06-30. |
| 2011 TRIUMPH TIGER 800 XC | Built 2010-09-01 to 2011-06-30. Listed as a series or trim of this model. |
| 2012 TRIUMPH TIGER 800 XC | Built 2010-09-01 to 2011-06-30. Listed as a series or trim of this model. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SMTTB19311 | 2019-03-18. Service bulletin. Technical Bulletin 193 provides instructions that applies to California Proposition 65 Hang Tag Reminder (Californian Market Only), Front Subframe Cable Clips, Alternator Cover Sealant, Chassis ECM DTCs Flagged Incorrectly, Pin Point Test - Power Source Voltage Drop/Voltage Rise, Inner Tube Valve Nut, Swinging Arm/Chain Rubbing Strip - Parts Kit, Service Manual Correction - Rear Brake Disc Minimum Thickness, Service Manual Correction - Main Bearing Selection, Owners Handbook Correction - Scheduled Maintenance Chart, Motorcycle Assembly Guide - Windscreen Installation. |
|---|---|
| SMT-TN 160 1 Nov | 2017-11-03. Service bulletin. Technical service bulletin 160 addressing 9 service instructions, some of which apply to all models. Instructions relate to frame bolt tightening sequence, new harness and harness/gear position sensor parts kit, panniers, instrument pack washer, side stand fixing, lower yoke pinch bolt tightening sequence, update to service manual full specifications, crankcase spares kit and sliding caliper seal kit. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.