NHTSA recall 10V040000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 10V040000 |
| Manufacturer's number | AOC |
| Manufacturer | TOYOTA MOTOR NORTH AMERICA, INC. |
| Reported | 2010-02-09 |
| Owners notified | 2010-03-04 |
| Component | SERVICE BRAKES, HYDRAULIC |
| Units potentially affected | 7314 |
What is wrong
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2010 CAMRYS. THE LENGTH OF THE POWER STEERING PRESSURE HOSE ON VEHICLES EQUIPPED WITH THE 4-CYLINDER (2AR-FE) ENGINE MAY BE INSUFFICIENT, SUCH THAT THE GAP BETWEEN THE CRIMP ON THE PRESSURE HOSE AND THE BRAKE TUBE FOR THE LEFT REAR BRAKE MAY BE INSUFFICIENT. UNDER THESE CIRCUMSTANCES THE BRAKE TUBE MAY INTERFERE WITH THE CRIMP AND MAY WEAR AND THEN PERFORATE.
What can happen
A BRAKE TUBE PERFORATION MAY RESULT IN BRAKE FLUID LEAKAGE. A LEAK IN BRAKE FLUID MAY IMPACT BRAKING PERFORMANCE INCREASING THE RISK OF A CRASH.
The remedy
TOYOTA WILL NOTIFY OWNERS AND, IF NECESSARY, DEALERS WILL REPLACE OR ADJUST THE BRAKE TUBE FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 4, 2010. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.
Notes
TOYTA RECALL NO. AOC. OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
| 2010 TOYOTA CAMRY | Built 2009-02-05 to 2009-03-26. |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| TTT063620 | 2022-06-21. Service bulletin. TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions |
|---|---|
| T-SB-0014-22 | 2022-04-18. Service bulletin. TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s). |
| T-TT-0636-20 Rev | 2021-04-19. Service bulletin. TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions. |
| T-TT-0636-20 | 2021-02-16. Service bulletin. TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions. |
| T-TT-0636-20 | 2021-02-01. Service bulletin. TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions. |
| ZE1_WEP_Dealer L | 2018-04-02. Service bulletin. Dealer Letter: In our continuing efforts to ensure the best in customer satisfaction, Toyota is announcing a Warranty Enhancement Program to extend the warranty coverage for repairs related to internal malfunctions of the Brake Actuator assembly or overly sensitive monitoring logic for the Brake Pedal Stroke Sensor on 2007-2011 MY Camry Hybrid Vehicles. In these vehicles, Toyota has received some reports where various brake system related warning lamps illuminate due to internal malfunctions of the Brake Actuator assembly. Separately, the same warning lamps may also illuminate due to overly sensitive monitoring logic for the Brake Pedal Stroke Sensor. Although the Brake Actuator assembly and Skid Control ECU are covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever occurs first), we at Toyota care about the customers? ownership experience. Toyota is now extending the warranty coverage for repairs related to internal malfunctions of the Brake Actuator assembly or overly sensitive monitoring logic for the Brake Pedal Stroke Sensor. Please see the Warranty Enhancement Program Details for additional information. |
| ZE1_WEP_Region L | 2018-04-02. Service bulletin. Region Letter: In our continuing efforts to ensure the best in customer satisfaction, Toyota is announcing a Warranty Enhancement Program to extend the warranty coverage for repairs related to internal malfunctions of the Brake Actuator assembly or overly sensitive monitoring logic for the Brake Pedal Stroke Sensor on 2007-2011 MY Camry Hybrid Vehicles. In these vehicles, Toyota has received some reports where various brake system related warning lamps illuminate due to internal malfunctions of the Brake Actuator assembly. Separately, the same warning lamps may also illuminate due to overly sensitive monitoring logic for the Brake Pedal Stroke Sensor. Although the Brake Actuator assembly and Skid Control ECU are covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever occurs first), we at Toyota care about the customers? ownership experience. Toyota is now extending the warranty coverage for repairs related to internal malfunctions of the Brake Actuator assembly or overly sensitive monitoring logic for the Brake Pedal Stroke Sensor. Please see the Warranty Enhancement Program Details for additional information. |
| T-SB-0041-14 | 2018-04-02. Service bulletin. TSB: Some 2007 ? 2011 model year Camry HV vehicles may exhibit a condition where the brake, ABS, and/or TRAC warning light(s) are ON and/or a Check VSC message is displayed. Diagnostic Trouble Code (DTC) C1391, C1252, C1253 or C1256 may be stored. This condition may be caused by a small internal brake fluid leak inside the brake actuator. Follow the Repair Procedure in this bulletin to address this condition. |
| T-SB-0040-14 | 2018-04-02. Service bulletin. TSB: Some 2007 ? 2011 model year Camry HV vehicles may exhibit a MIL ?ON? and brake warning lights (ABS/VSC) illuminated in the instrument panel with Diagnostic Trouble Code (DTC) C1247 (Stroke Sensor Malfunction) stored in the ABS/VSC Electronic Control Unit (ECU). This DTC may set as a result of an overly sensitive monitoring logic without any other ABS/VSC system issue. Follow the Repair Procedure in this bulletin to properly diagnose the system and, if necessary, replace the ABS/VSC ECU with an ECU containing the updated monitoring logic. |
| E0U_LSC_Dealer L | 2018-04-02. Service bulletin. Dealer Letter: The subject vehicles contain a brake reservoir which has two separate chambers connected by a filter. This filter may become clogged, resulting in illumination of the Brake ( ) warning lamp due to low fluid level in one of the reservoir chambers. Under certain conditions this could cause additional warning lamps shown below to illuminate and front brake assist could be temporarily lost. Please note: In limited operating conditions, a warning buzzer may also sound. A new brake reservoir assembly has been designed to prevent this condition from occurring. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.