NHTSA recall 08V390000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 08V390000 |
| Manufacturer's number | 0808-001 |
| Manufacturer | SMART USA DISTRIBUTOR LLC |
| Reported | 2008-08-07 |
| Owners notified | 2008-10-30 |
| Component | STRUCTURE:FRAME AND MEMBERS |
| Units potentially affected | 43 |
What is wrong
SMART USA IS RECALLING 43 MY 2008 FORTWO 451 VEHICLES. A SINGLE BATCH OF PAINT SENT TO THE COMPANY DID NOT MEET SPECIFICATIONS. A RE-WORK WAS DONE IN THE PLANT USING DIFFERENT FORMULATIONS OF PAINTING MATERIALS. AFTER THE RE-WORK WAS COMPLETED, IT WAS DETERMINED THAT THE COMBINATION OF MATERIALS USED TO REPAINT THE FRAME AND CHASSIS COULD LEAD TO DE LAMINATION OF THE PAINT MATERIALS FROM THE BODY AND FRAME STRUCTURES.
What can happen
SUCH DE LAMINATING CAN TAKE PLACE IN THE AREA OF THE BODY WHERE THE WINDSHIELD AND ROOF HAVE BEEN AFFIXED WITH ADHESIVE, WHICH COULD AFFECT THE ADHESION OF THOSE COMPONENTS TO THE VEHICLE BODY, INCREASING THE RISK OF SEPARATION. THIS COULD CAUSE A CRASH IF THE ROOF OR WINDSHIELD SEPARATED FROM THE VEHICLE WHILE IN MOTION.
The remedy
DEALERS WILL REPAINT THE AFFECTED AREAS TO MEET SPECIFICATIONS. THE RECALL BEGAN ON AUGUST 18, 2008. OWNERS MAY CONTACT SMART USA AT 1-248-648-2451.
Notes
SMART USA RECALL NO.0808-001.CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.
| 2008 SMART FORTWO | Built 2008-04-01 to 2008-06-30. |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| LI82.62-P-078631 | 2026-10-06. Service bulletin. Complaint Clanking noise from the area of the speakers in the doors. Cause Under analysis. Remedy To narrow down the cause, first of all remove the door trim. • If the noise continues to occur even with the door trim removed, then continue the diagnosis working towards the speaker and if necessary, create a TIPS case with an informative video as an attachment. Note: Please refer to this document in the warranty claim and, once diagnosis is completed, select the damage code depending on the component part that is causing the issue. • If the noise stops when the door trim is removed, please proceed in accordance with LI72.10‑P‑067691. Information: In this case, do not use a damage code for the speakers in the warranty claim! |
|---|---|
| LI82.62-P-078631 | 2026-08-11. Service bulletin. Complaint Clanking noise from the area of the speakers in the doors. Cause Under analysis. Remedy To narrow down the cause, first of all remove the door trim. • If the noise continues to occur even with the door trim removed, then continue the diagnosis working towards the speaker and if necessary, create a TIPS case with an informative video as an attachment. Information: Please refer to this document in the warranty claim and, after completing diagnosis, select the damage code corresponding to the component part that caused the problem. • If the noise stops when the door trim is removed, please proceed in accordance with LI72.10-P-067691. Information: In this case, do not use a damage code for the speakers in the warranty claim! |
| LI82.35-P-078467 | 2024-10-25. Service bulletin. Complaint Washer fluid system leaks Cause Various possible causes: 1. Washer fluid reservoir itself. 2. Seal on washer fluid pump/washer fluid reservoir. 3. Washer fluid pump. 3.1. Distributor housing leaks. 3.2. Pump fitting leaks. 3.3. Washer fluid hose cannot be snapped into place on pump fitting. 3.4. Washer fluid hose will not stay on pump fitting, although connector OK. 4. Washer fluid line. 4.1 Connector will not stay on pump fitting because it is broken. 4.2 Sealing ring in connector missing. 4.3 Sealing ring in connector fitted, but deformed and therefore leaks. 4.4 Damage to washer line by animal. 5. Seal on heating washer fluid reservoir/washer fluid reservoir. Remedy Replace defective component parts only. Do not replace any adjacent component parts that are intact. Note: Repair kits for washer line hoses do exist to allow patches for line damage. |
| LI80.20-P-064069 | 2018-05-07. Service bulletin. Outside door handle does not return to end position |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.