NHTSA recall 07V374000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 07V374000 |
| Manufacturer's number | 07512 |
| Manufacturer | INTERNATIONAL TRUCK & ENGINE CORPORATION |
| Reported | 2007-08-22 |
| Component | ENGINE AND ENGINE COOLING:ENGINE:DIESEL |
| Units potentially affected | 49 |
What is wrong
ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS BUILT WITH CUMMINS ISM C876 ENGINES, THE ELECTRONIC CONTROL MODULE FAILS TO RECOGNIZE INPUTS OF THE VEHICLE ELECTRONIC CONTROL UNIT OR FROM A DRIVER ACTUATED DASH SWITCH THEREBY INCREASING THE RISK OF UNINTENDED (OR UNEXPECTED) ELEVATED EXHAUST TEMPERATURES.
What can happen
WHILE THIS CONDITION DOES NOT INVOLVE A RISK OF FIRE IN THE VEHICLE ITSELF, IT COULD PRESENT A FIRE HAZARD IN A SITUATION WHERE THE VEHICLE'S EXHAUST IS IN CLOSE PROXIMITY TO MATERIALS OR SUBSTANCES THAT CAN MELT, BURN, OR EXPLODE.
The remedy
CUMMINS, IN CONJUNCTION WITH INTERNATIONAL, WILL CONDUCT THE REMEDY CAMPAIGN. CUMMINS WILL INSTALL NEW ECM SOFTWARE. OWNERS CAN CONTACT CUMMINS AT 1-800-343-7357 OR INTERNATIONAL AT 1-800-448-7825.
Notes
INTERNATIONAL RECALL NO. 07512.CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.
| 2007 INTERNATIONAL 5500I | Built 2006-05-15 to 2007-04-02. |
|---|---|
| 2008 INTERNATIONAL 5500I | Built 2006-05-15 to 2007-04-02. |
| 2007 INTERNATIONAL 5600I | Built 2006-05-15 to 2007-04-02. |
| 2008 INTERNATIONAL 5600I | Built 2006-05-15 to 2007-04-02. |
| 2007 INTERNATIONAL 7600 | Built 2006-05-15 to 2007-04-02. |
| 2008 INTERNATIONAL 7600 | Built 2006-05-15 to 2007-04-02. |
| 2007 INTERNATIONAL 8600 | Built 2006-05-15 to 2007-04-02. |
| 2008 INTERNATIONAL 8600 | Built 2006-05-15 to 2007-04-02. |
| 2007 INTERNATIONAL 9200I | Built 2006-05-15 to 2007-04-02. |
| 2008 INTERNATIONAL 9200I | Built 2006-05-15 to 2007-04-02. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| IK2600090 | 2026-02-05. Other. New CARB Idle Reduction Change Request |
|---|---|
| IK2600047 | 2026-02-05. Service bulletin. Engine replacements for all International engines will need to follow this procedure. |
| IK0800407 | 2024-03-06. Service bulletin. Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison transmission or PSI engine. |
| IK2600069 | 2023-10-05. Service bulletin. How to request a horsepower quote; all International and Cummins engines |
| IK1201391 | 2023-08-02. Service bulletin. Snap-On torque wrench requirement for all big bore engine connecting rod bolts; A26, MaxxForce 13, N13 engines |
| IK0800407 | 2023-04-07. Service bulletin. Starter diagnostics and warranty claim procedure for all engines and all chassis EXCLUDING vehicles equipped with PSI engines or Cummins ISB engine with Allison transmissions |
| IK1201472 | 2022-10-05. Service bulletin. Pico Scope CCOS (Crankcase Separator Test) |
| IK1201469 | 2022-09-07. Service bulletin. PicoScope Test One Channel RCT |
| IK1201241 | 2022-03-02. Service bulletin. ECM Calibration for DPF Replacement; Applies to MaxxForce Engines |
| IK1201299 | 2021-10-02. Service bulletin. Engine Oil Capacities. All International electronic engines 1994 to present and Cummins ISB, ISM, or ISX engines |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.