NHTSA recall 07V014000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 07V014000 |
| Manufacturer's number | 06217 |
| Manufacturer | GENERAL MOTORS CORP. |
| Reported | 2007-01-18 |
| Owners notified | 2007-03-21 |
| Component | STRUCTURE |
| Units potentially affected | 98707 |
What is wrong
CERTAIN PASSENGER VEHICLES NOT EQUIPPED WITH OPTIONAL ROOF-MOUNTED SIDE IMPACT AIR BAGS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, 'OCCUPANT PROTECTION IN INTERIOR IMPACT.'
What can happen
IN A CRASH, HEAD IMPACT PROTECTION MAY BE INADEQUATE.
The remedy
DEALERS WILL INSTALL ENERGY ABSORBING PLASTIC TO THE HEADLINER TRIM TO REDUCE THE SEVERITY OF HEAD IMPACTS IN A CRASH. THE RECALL BEGAN ON MARCH 21, 2007. OWNERS MAY CONTACT CHEVROLET AT 1-800-630-2438.
Notes
GM RECALL NO. 06217. CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.
| 2005 CHEVROLET COBALT | Built 2004-09-01 to 2005-06-30. |
|---|---|
| 2006 CHEVROLET COBALT | Built 2005-04-01 to 2006-03-31. |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| PIP5358B | 2022-06-13. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that have an unusual noise and is difficult to identify, isolate or pinpoint. Technician should get record a sound clip or take a video of the noise for assessment by engineering. Technician will need to call General Motors Technical Assistance Center for further assistance. |
|---|---|
| PIP5358A | 2021-06-14. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that have an unusual noise and is difficult to identify, isolate or pinpoint. Technician should get record a sound clip or take a video of the noise for assessment by engineering. Technician will need to call General Motors Technical Assistance Center for further assistance. |
| PI0281D | 2021-04-26. Service bulletin. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy. |
| PI0281D | 2021-04-26. Service bulletin. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy. |
| 08-08-51-002A | 2018-04-16. Service bulletin. This informational bulletin provides information pre-painting/cleaning process for TPO plastic fascias. |
| PIP4495E | 2017-11-14. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that have a loud tick or rattle noise under the hood at all operating conditions. Technician will need to check the lower and oil pressure to the upper end oil pressure. Technician will need to inspect the oil feed orifice in the cylinder head. Technician will clean out and debris found in the orifice. |
| PIP5338 | 2017-08-15. Service bulletin. This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be reviewed to determine the root cause of the concern. If a repair attempt made the concern better but not eliminated or had no affect at all, and are requesting assistance from General Motors Technical Assistance Center record another Pico file and save it to the computer. After the new Pico Oscilloscope data has been saved email the data to General Motors Technical Assistance Center in the subject line include ?Vibration? ?Business Associate Code? and the last 8 of the Vehicle Identification Number. |
| PI0373A | 2016-11-23. Service bulletin. THIS PRELIMINARY INFORMATIONAL BULLETIN PROVIDES A PROCEDURE FOR RELEARNING THE POWER FOLDING MIRRIORS AND ROAD TESTIN TO VERIFY THEY CORRECT A CONDTION OF THE POWER FOLDING MIRRIORS GLASS SHAKES, FLUTTERS AT NORMAL DRIVING CONDITIONS. |
| PIC-5260-A | 2016-08-11. Service bulletin. THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THE STEPS ON DIAGNOSING THE CONCERN. VEHICLE'S SUNROOF OPERATION INTERMITTENT, BIND, NOISE, AUTO-REVERSE, AND/OR WATER LEAKS. |
| PIT-3749D | 2011-05-26. Service bulletin. GM: ON SOME TRUCK MODELS THERE IS SOME FRAME CORROSION. *RM UPDATED ON 5/2/2012. *KB |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.