Service bulletins for the 2013 Volkswagen GTI
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
857 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| Update Bulletin | 2019-04-01. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; ELECTRICAL SYSTEM:SOFTWARE. UPDATE Technical Bulletin (UPDATE ? 91J7 RCD 510 (Premium 8) Radio Software): This update has been proactively released to address the following: 1. Bluetooth audio runs in mono mode 2. Bluetooth audio level too high/distorted Bugs contained in Level 07 software for certain Premium 08 radios may cause Bluetooth audio quality complaints. The production solution to this issue was the Introduction of Level 08 software to prevent certain Bluetooth audio quality complaints CW 42/12. This document informs how to install the upgraded software. |
|---|---|
| TT 96-12-07 | 2019-04-01. Service bulletin. ELECTRICAL SYSTEM; STEERING. Tech Tips (Equipped With KESSY ? Key Adaptation Tip): When adapting keys on a vehicle equipped with KESSY, it is recommended to remove the immobilizer reader coil from behind round cover on steering column trim and insert key inside the reader coil. The steering column trim does not need to be completely removed to access reader coil. For vehicles with the Start/Stop button on the steering column, the Start/Stop button assembly can be removed from column trim without disassembling trim. Start/Stop button connector must be disconnected to allow reader coil to be removed from around button assembly. Start/Stop button should be reconnected during key adaptation. This document provides photo examples of the procedure. |
| TT 90-12-04 | 2019-04-01. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Tech Tips (Service Interval Settings after Instrument Cluster Replacement): This document informs that after instrument cluster replacement, service interval maximum values may need to be manually set. To set values manually, use Vehicle self-diagnosis to select 17- Instrument Cluster, then adaptation. Channel ?SIA: maximum value of distance to service? should be set to 16000 km and channel ?SIA: maximum value of time to service? should be set to 372 days. |
| Update Bulletin | 2019-04-01. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; ELECTRICAL SYSTEM:SOFTWARE. UPDATE Technical Bulletin (UPDATE ? 91J7 RCD 510 (Premium 8) Radio Software): This update has been proactively released to address the following: 1. Bluetooth audio runs in mono mode 2. Bluetooth audio level too high/distorted Bugs contained in Level 07 software for certain Premium 08 radios may cause Bluetooth audio quality complaints. The production solution to this issue was an introduction of Level 08 software to prevent certain Bluetooth audio quality complaints CW 42/12. |
| TT 91-12-14 | 2019-04-01. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. Tech Tips (Radio Inoperative After UPDATE 91J7 SD Card Software Update): If radio is inoperative after performing UPDATE 91J7, start by checking the current software level of the radio. Software level may have changed during update, so software level must be checked again after update has failed. If radio cannot be reached in Vehicle self-diagnosis, software level can be checked by running GFF and printing or saving diagnostic log. Software level location on GFF log is highlighted in this document. |
| TT 80-13-02 | 2019-04-01. Service bulletin. EQUIPMENT. Tech Tips (Broken or Difficult to Adjust, Dash Panel Air Vents): This document informs when performing repairs on air vents under warranty, it is important to determine if the damage was caused by outside influence or customer abuse. If there are no signs of abuse, please replace the vent(s). DO NOT disassemble or in any way attempt to repair the vent(s). |
| TT 44-13-03 | 2019-04-01. Service bulletin. WHEELS. Tech Tips (Four Wheel Alignments): This Tech Tip provides an overview of vehicle four wheel alignment, and important steps that should be followed when performing four wheel alignments. |
| TT 00-13-04 | 2019-04-01. Service bulletin. EQUIPMENT. Tech Tips (All Models 2000-2014 - Part ordering): If a needed service part is on back order, upgrade the daily order to a red order and check the ?Car Down? box to escalate the order. This document informs how to contact VWGoA Parts Specialist for help. |
| On-Car Analysis | 2019-04-01. Service bulletin. POWER TRAIN. On-car analysis list of Customer Complaints: Transmission Concerns (including clutch assembly, bevel box and Haldex) |
| TT 44-13-04 | 2019-04-01. Service bulletin. STEERING; STEERING: STEERING WHEEL/HANDLE BAR. Tech Tips (Steering Wheel Off Center): This Tech Tip was established to explain the influence the adjustable steering column tilt position has on the steering wheel being off center and to provide information on checking for steering wheel off center. |
| On-car Analysis | 2019-04-01. Service bulletin. POWER TRAIN. On-car analysis list of customer complaints: Transmission Concerns (including clutch assembly, bevel box and Haldex) |
| V211302 2024061 | 2019-04-01. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. Technical Bulletin (Rattling Noises from Engine Compartment Area or Exhaust System): Customers may complain of a rattling noise from engine or exhaust area while accelerating from 1800-3000 RPM. In order to complete proper diagnosis and ensure that the noise is coming from the turbocharger use the procedure in this document. |
| VWS-13-05 | 2019-04-01. Service bulletin. EQUIPMENT. Warranty Information (Volkswagen DoubleCheck Labor Operations): Volkswagen DoubleCheck Labor Operations for All VW Models Except Routan ElsaWeb/Pro was updated on August 12, 2013 with the following Volkswagen DoubleCheck labor operations for all Volkswagen models except Routan. This document informs where in ElsaWeb/Pro this information can be located. |
| V191303 2022549 | 2019-04-01. Service bulletin. ENGINE AND ENGINE COOLING. Technical Bulletin (Electric Coolant Fans Continue to Run after Ignition is Switched OFF): This document informs it is considered normal operation for the electric coolant fans to continue to run for up to 15 minutes after the ignition is switched off in gasoline engine applications, and up to 16 minutes in diesel engine applications. |
| V871301 2005566 | 2019-04-01. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Technical Bulletin (HVAC, Unpleasant Odor): An unpleasant odor is coming from Heating and Ventilation system. Odor mainly occurs after vehicle has been sitting (unused) at least 5 hours and within 20 to 60 seconds after vehicle is first started. Contaminants are effectively neutralized using the AIRCOMATIC? II Ultrasonic Climate System Cleaner (VAS 6189A) or AIRCOMATIC? III Ultrasonic Climate System Cleaner (VAS 6189B) and AIRCO-CLEAN? Ultrasonic HVAC Treatment (30208). All other cleaning methods are no longer permitted. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available. |
| V171303 2017813 | 2019-04-01. Service bulletin. ENGINE. Technical Bulletin (Oil Consumption Measurement): Customers have stated oil consumption is higher than the Volkswagen oil consumption standard of up to 0.5 quarts per 600 miles, or 0.5 liters per 1000 km. This document informs how to test the oil consumption rate |
| TT 57-10-04 | 2019-04-01. Service bulletin. ELECTRICAL SYSTEM. Tech Tips (No Communication with the J519 Vehicle Electrical System Control Module/Body Control Module): If no communication can be established to the Vehicle electrical system control module J519 (address word 09) in Guided Fault Finding or Vehicle Self Diagnosis, it may be necessary to cycle door locks. This document informs of the recommended observations that should be taken when performing the procedure. |
| V961301 2026177 | 2019-04-01. Service bulletin. ELECTRICAL SYSTEM. Technical Bulletin (Keyless Entry Inoperative after Access/Start (KESSY) Module Replacement): After replacing the Access/Start (KESSY) module, the keyless entry does not work. The Access/Start (KESSY) module service parts are programmed incorrectly, resulting in a lack of functionality. This document informs of the conditions necessary to allow the software to be reprogrammed |
| V001304 2034407 | 2019-04-01. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Technical Bulletin (Choosing Service Numbers ? Transmission and Drivetrain): To ensure that customer concerns are being properly addressed, Volkswagen created a reference Service Numbers example sheet available for customer concerns/technician findings. Proper Service Number usage will ensure customer concerns/technician findings are properly addressed allowing for more accurate and timely repair information, Required Vehicle Updates and Technical Bulletins. |
| TT 57-12-03 | 2019-04-01. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. Tech Tips (Remote Functions Inoperative and/or Faults 00955, 00956, 02660): If the remote key fob is depressed repeatedly or a button is held down while outside the remote operating range, the key remote functions may no longer operate. This document informs Before running GFF or attempting any adaptation with the scan tool, attempt to restore remote functionality by following the key synchronization procedure in this document. |
| On Car Analysis | 2019-04-01. Service bulletin. POWER TRAIN. On-car analysis list of Customer Complaints: Transmission Concerns (including clutch assembly, bevel box and Haldex) |
| On Car Analysis | 2019-04-01. Service bulletin. POWER TRAIN. On-car analysis list of Customer Complaints: Transmission Concerns (including clutch assembly, bevel box and Haldex) |
| On Car Analysis | 2019-04-01. Service bulletin. POWER TRAIN. On-car analysis list of Customer Complaints: Transmission Concerns (including clutch assembly, bevel box and Haldex) |
| On Car Analysis | 2019-04-01. Service bulletin. POWER TRAIN. On-car analysis list of Customer Complaints: Transmission Concerns (including clutch assembly, bevel box and Haldex) |
| On Car Analysis | 2019-04-01. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. On-car analysis list of Customer Complaints: Transmission Concerns (including clutch assembly, bevel box and Haldex) |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.